Custom Shop Strat:

X-Light 5.9 lb. Ash Fat HSS Strat + Working Bridge Tone + Treble Bleed + SRV Pickups + Coil Split Duncan SJBJ-1b Humbucker on Bridge 59' Style Neck with "D" Profile + Low Action + Leveled + Crowned and Polished Jumbo Frets!

This Great Guitar Includes:

H-S-S Natural Ash Feather-light Fat Strat 2023 with a Working Bridge Tone Control + Treble Bleed Circuit+ Coil Split on the Duncan SJBJ-1b Humbucker Bridge Pickup included are Leveled, Crowned and Polished Frets! Very low action with NO BUZZ.

Solid Natural Swamp Ash Strat with Beefy 59' Style "D" profile Rosewood/Maple Neck + Low Action+ 12" Radius Neck 2023 With New Hardware. The nut width is a standard 1-11/16.

No sharp fret ends from Haywire Custom Shop!

All Fret ends dressed for a softer feel.

Guitar Description:

X-Light 5.9 lb. Classic Strat + 12" Radius Maple/Rosewood Neck with lots of resonance. Completed by Haywire Custom Shop USA-South Carolina. H-S-S and Pearl Guard
 Neck Profile- Beefy "D" Profile with Jumbo frets


The Maple/Rosewood Neck is a very most popular neck profile, very similar to Gibson necks. Its medium and soft "D" shape will feel comfortable to most players.
This Classic Strat :

Includes all NEW: Hardware, New set of 3 Noiseless SRV Pickups plus Seymour Duncan Humbucker + Pearl Guard, New Jack, Knobs + New electronics, Neck plate and Strap Knobs and Screws included.
                                                                 
5-Way Switch pickup selections plus a Coil Split Switch on bridge Humbucker:
position 1 Humbucker pickup on the Bridge pickup alone and can be split with switch between the tone controls. 

position 2 bridge + middle pickup in parallel

position 3 middle pickup alone
position 4 middle + neck pickup in parallel
position 5 neck pickup alone

Seymour Duncan JB Jr. SJBJ-1 Features:

  • Humbucker
  • Single-coil sized stacked pickup
  • Color: Black
  • Bridge position
  • Twin-coil design
  • Adjustable pole pieces
  • Emulates magnetic field of a full-size humbucker
  • Great harmonics and sweet high end
  • High output: 15K

What is a split-coil Humbucker pickup?

A split-coil pickup is a humbucking pickup that normally uses two coils but is wired in such a way that it only uses one of them. This gives a pickup single coil qualities that many guitar players desire, and it makes the pickup more versatile.

Bridge Pickup is "Split-Coil" with toggle switch in between the Tone Controls:

PICKUPS: Duncan Bridge and SRV Neck and Middle


              Buyers please note: All electronics and hardware including Pick guard, SRV Pickups, Tremolo bridge + 1 Volume +2 Tone Controls, strap knobs, screws, Duncan Humbucker pickup on the bridge, input jack, all wiring and back plate have been added free of charge.                                                  

 We hear you.

                                THIS GUITAR HAS A WORKING BRIDGE TONE CONTROL!

In 99% of Fender Stratocaster guitars the tone control doesn't work for the bridge-only pickup selection of the Stratocaster.

It works on a few, approximately 1% of Stratocaster guitars whether made by Fender or by Squier, or Affinity, Fender Japan, Fender Taiwan, Fender Mexico, American (circa 1991) or Fender China and more have no tone control on the bridge pickup. The tone controls do work for the other four switch positions.

                                                                 Why?

It was just a design that was only meant to please the inventor, Mr. Leo Fender.

Leo wanted a pickup position that sounded similar to a steel guitar. So now in Fender guitars the bridge pickup selection has no tone control wired to it whatsoever and no one at Fender Corp. has seemed to notice. They have failed for years to hear what guitarists have been asking for.

Can we simply have a tone control on our bridge pickup?                                      
                                             YES-Your Bridge tone control is now here.

From the Haywire Custom Guitars-Custom Shop

Why is the Treble Bleed Circuit included?

Turning the volume control applies varying amounts of a specially tuned high frequency filter to the pickups.
Now each pickup has the ability to produce a stronger, fuller tone and 50% less noise. This variable treble bleed circuit is pre-installed. The variable treble bleed/bypass circuit corrects the problem of high frequency losses common in Strats and Teles.
It provides auto-adjustment of tone at reduced volumes and improves audio taper between 3 and 10.
Now the tone is crisp, clear and articulate all the way down to 1.

                                                                                 Question?
                                                    With The Treble Bleed modification installed:
                                                                           How does it work?

Answer-It allows you to roll off your volume without losing the highs.
Would you like being able to use the volume control... without sacrificing tone?
Now You Can... with a Treble Bleed Circuit Mod added on this guitar!

As you turn your guitar's volume down, the pot allows some of the current to go to ground as opposed to the output.

The frequencies that leave first are the highs, which leave the tone muddy and obscured without an "edge" on it to a discerning ear.

               So....., you can now avoid this problem with the installed: Haywire Treble Bleed Circuit

          NOW......When you lower your guitar's Volume control take notice if you lose your tone's clarity. 

If your tone is now muddy & with too much bass, adding our Haywire Treble Bleed Circuit to your Volume Control Pot, your guitar will "Bleed" in more Treble as you turn your volume down.  Now you have much cleaner, articulate tones when rolling down the volume control.
 
This feature allows the treble frequencies to be re-introduced into the output for clarity and improved timbre and no loss of highs for you. At Haywire we simply install a TB Circuit capacitor. We build them in our custom guitars for a better Low and High sound spectrum:

1-error-correction of signals with enhanced clarity

2- preserve high end frequencies

3-improved taper when rolling back your volume control

Note: More about this Treble Bleed Circuit Mod on the Haywire Custom Guitars Website
Specifications:

  • Body Wood: Solid Swamp Ash
  • Finish:  Natural
  • Scale Length: 25-1/2" (648mm)
  • Neck Pocket Size: 2-3/16" (55.55mm) Width x 3"(76.2mm) Length x 5/8"(15.88mm) Depth
  • Neck Mounting Hole Dimension: standard 51mm x 38mm
  • Neck mounting holes and wire path are drilled already.
  • Routed for HSH pickup configuration, which is able to accept universal pickup settings.
  • For Pick-Ups the ohms are: Special Humbucker Bridge Pickup:
    DC Resistance: 15.10K Special Strat
    DC Resistance: 10.58K -11.33K Special Humbucker Neck Pickup:
    DC Resistance: 7.04K  Middle Pickup   Buyers please note: All electronics and hardware including Pick guard, 3 noiseless SRV Pickups, Tremolo bridge + 1 Vol +2 Tone Controls, strap knobs, screws, input jack, all wiring and back plate have been added free of charge. Please replace electronics with your own parts if required. 
  • Buyers please note: Haywire Custom Guitars offers custom guitars made to their customer's specifications if you have any questions, concerns or special requests then please ask before purchase. We are a Custom Shop featuring many custom options for players. Haywire guitars are made in South Carolina at a reasonable price just for players. We also offer custom guitar neck replacements, installations and custom guitar neck shaving. "Building satisfied players one Haywire Custom guitar at a time!" Great Tone and Sustain with lots of resonance.
  • Our electronics, pickguards and pilot holes are added free of charge on used bodies, however if you have any specific electronic requirements, please ask prior to purchase.
  • We have our own house brand SRV pickups, but we have access to anything our customers need. We want you to be happy so please let us know exactly what you want before buying.

Reverb Buyer Protection

Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.

Listed2 months ago
ConditionExcellent (Used)
Excellent items are almost entirely free from blemishes and other visual defects and have been played or used with the utmost care.Learn more
Brand
Model
  • X-Light 5.9 lb. Ash Fat HSS Strat + Working Bridge Tone+Treble Bleed+Pickups + Coil Split Duncan SJBJ-1b Humbucker on Bridge 59" Style Neck with "D" Profile
Finish
  • Natural Ash Strat
Categories
Year
  • 2023
Made In
  • United States
Body Type
  • Solid Body

Reverb Protection

Simple Returns, Secure Transactions, Human Support

Learn more

Secure Checkout

Haywire Custom Guitars Inc. South Carolina-U.S.A.

Conway, SC, United States
Sales:222
Joined Reverb:2016

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

Oops, looks like you forgot something. Please check the fields highlighted in red.