The HeadRush FRFR-108 MKII powered speaker cab is the perfect partner for amp modelers! If you're new to FRFR amplifiers, FRFR stands for "full-range flat-response." This special type of amplification is very important for amp modeling pedals and pedalboards, as your amplifier needs to sound pure and transparent, so it can deliver a true "amp in the room" sound without coloring it as a traditional guitar amp would. The FRFR-108 MKII is precision-designed to get the most out of your modeler and deliver all the intricacies of your amp and cab emulations, with enough volume to be ready for any stage, rehearsal or jam session.


PURE AND POWERFUL TONE

FRFR-108 MKII outputs a massive 2000 watts, which means you have enough headroom for almost any performance or rehearsal.

Featuring a specially voiced 8-inch woofer and high-frequency compression driver, the FRFR-108 MKII delivers a precise, full response across the entire frequency range, without any artificial coloration--which is critical to getting the most out of your amp modeler. The FRFR-108 MKII's performance is exceptional, with max 129dB SPL and 46-22kHz frequency range.


ALL THE CONNECTIONS YOU NEED - INCLUDING BLUETOOTH

FRFR-108 MKII features two combo XLR + 1/4" combo inputs for connecting your amp modeling pedal or pedalboard, each with their own independent volume controls. You can also wirelessly connect a mobile device to the FRFR-108 MKII via Bluetooth, so you can stream music wirelessly at rehearsal or during set breaks. There is also an XLR output for chaining more than one speaker together or sending the signal from your FRFR out to a front of house mix.


ADAPTS TO ANY STAGE OR ROOM

Stages and rehearsal rooms can easily become dense and muddy sounding as lower frequencies from different instruments battle each other; FRFR-108 MKII has a HPF cut switch to quickly pull those troublesome frequencies out and make sure your tone sits perfect in the mix. Unwanted electrical noise can also be a common problem; FRFR-108 MKII's ground lift switch can eliminate hums and buzzes resulting from ground loops.


ROAD-READY LIGHTWEIGHT DESIGN

FRFR-108 MKII is rugged yet lightweight and easy to transport (at 21 lbs / 9.53 kg) making one trip load-ins at the gig or rehearsal space easier than ever. While you can use FRFR-108 MKII in its intended wedge position, its versatile design means that it can also be used in an upright or pole-mounted position, making it easier to direct your sound wherever you need it, which is especially helpful at outdoor gigs or other places where PA backline is limited.


Features:

- Special type of amplification for amp modeling pedals and pedalboards

- Specially voiced 8-inch woofer and high-frequency compression driver

- Two combo XLR + 1/4" inputs

- Wirelessly connect a mobile device via Bluetooth

- HPF cut switch to quickly pull those troublesome frequencies out

- Ground lift switch can eliminate hums and buzzes

- Can also be used in an upright or pole-mounted position

- Rugged yet lightweight and easy to transport


Specs:

-Output Power: 2000 W

-Low-Frequency Driver: 8.0" (203 mm) driver, 2.0" (50 mm) high-temperature voice coil.

-High-Frequency Driver: 1.0" (25 mm) exit ceramic driver with 1.4" (35 mm) coil.

-Crossover Frequency: 2 kHz

-Maximum SPL: 129 dB (peak) dB-SPL @ 1 m

-Frequency Response: 62 Hz - 20 kHz (+/-3 dB)

-Frequency Range: 52 Hz - 20 kHz (-10 dB)

-Horn Coverage: 90* horizontal x 60* vertical (nominal)

-Inputs: (2) XLR+1/4" (6.35 mm) TRS combo inputs (Balanced)

-Outputs: (1) XLR output (Link)

-Input Impedance Line: 10 KO balanced, 20 KO unbalanced

-Gain/Volume Control Range: -8 to 0 dB, +4 dBu nominal, +10 dBu for max output

-HPF Switch: 100 Hz

-Bluetooth:

- Version: 5.0

- Profile: A2DP, AVRCP

- Codec: SBC

- Range: up to 100 feet (30.5m)

-Power Connection: IEC power cable

-Input Voltage: 100-120V, 50/60 Hz; 220-240V, 50/60 Hz

-Consumption: 1100W

-Fuse: T15AL AC250V; 220-240V T6.3AL AC250V

-Protection: Electronic clip, thermal, and transducer overdrive protection

-Mounting/Installation: Standard 36 mm pole socket

-Operating Temperature: 14*F to 113*F / -10*C to 45*C

-Dimensions (WxDxH): 10.1" x 9.6" x 17.2" (256 mm x 245 mm x 436 mm)

-Weight: 21.05 lbs. (9.5 kg)


ConditionBrand New (New)
Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more
Brand
Model
  • FRFR-108 2000-Watt 1x8" Active Guitar Speaker Cabinet
Categories

Reverb Protection

Simple Returns, Secure Transactions, Human Support

Learn more

Secure Checkout

zZounds

Oakland, NJ, United States
Sales:81,263
Joined Reverb:2016

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

Oops, looks like you forgot something. Please check the fields highlighted in red.