FBT MaxX 6A (pair) Powered PA Speakers 15" Woofer
New Price$849
Local Pickup Only
This piece of gear has sold
View similar gear from other sellers on Reverb
Watch this gear and we'll notify you if it becomes available again.
Listed:6 years ago
Views:166
Watchers:1
Offers:1
Armonk, NY, United States
FBTMaxX 6A - 900-Watt 2-Way Bi-Amplified PA Speaker with15" Woofer
(Original Owner)
Overview:
The FBTMaxX 6A Active 2-way PAspeaker combines an extremely light and sturdy enclosure with the performance capable of handling a variety of monitoring functions. The speaker's molded integral handles and built-in stand adapter make for easy portability and setup. The four built-in anchoring points allow for convenient wall or ceiling mounting for permanent installation.
The FBTMaxX 6A's 15" LF and1" horn-loaded HF transducers are powered by two high-quality AB class amplifiers capable of a combined 900 Watts of power, and are protected by the ADAP (Advanced Dynamic Active Protection) processor technology for optimized performance and peak reliability.
· Bi-amplifed 2-way P.A. speaker with 900 Watts of power and custom protection circuitry
· High output, high 128dB SPL
· 15" custom woofer, 1" horn-loaded compression driver
· 90° x 60° dispersion angle for wide, accurate horn coverage
· Patented ADAP Advanced Dynamic Active Protection processor foramplifier and transducer protection with optimized acoustic response
· Active 24dB/Octave electronic crossover
· 3-band EQ, Mic/Line selector with dedicated Gain control knob,Volume control knob
· Rugged injection-molded polypropylene enclosure, low profiletrapezoidal design allows for use as stage monitor
· Built-in anchor points for wall or ceiling mounting
· Professional balanced inputs withNeutrik TM combo connections and XLR link out
Technical Specs:
Active or Passive
Active
Frequency Response
40 Hz - 20 kHz
Power Capacity
LF: 700 Watts
HF: 200 Watts
Maximum Sound Pressure Level (SPL)
128dB
Nominal Sensitivity
98dB
Impedance
22 kOhm
Crossover
Active, 1.3 kHz
Low Frequency Driver
15" custom woofer with Neodymium magnet
High Frequency Driver
1" horn-loaded Compression Driver
Enclosure Material
Polypropylene with gas injection molding
Input Connections
1 x 3-pin XLR/1/4" TRS Combo
1 x 3-pin XLR Male Link Output
Dimensions
29.8 x 19 x 15.7" (757 x 482 x399mm)
Weight
63.9 lb (29 kg)
Specialties
Advanced Dynamic Active Protection Circuitry
Bi-Amplified
(Original Owner)
Overview:
The FBTMaxX 6A Active 2-way PAspeaker combines an extremely light and sturdy enclosure with the performance capable of handling a variety of monitoring functions. The speaker's molded integral handles and built-in stand adapter make for easy portability and setup. The four built-in anchoring points allow for convenient wall or ceiling mounting for permanent installation.
The FBTMaxX 6A's 15" LF and1" horn-loaded HF transducers are powered by two high-quality AB class amplifiers capable of a combined 900 Watts of power, and are protected by the ADAP (Advanced Dynamic Active Protection) processor technology for optimized performance and peak reliability.
· Bi-amplifed 2-way P.A. speaker with 900 Watts of power and custom protection circuitry
· High output, high 128dB SPL
· 15" custom woofer, 1" horn-loaded compression driver
· 90° x 60° dispersion angle for wide, accurate horn coverage
· Patented ADAP Advanced Dynamic Active Protection processor foramplifier and transducer protection with optimized acoustic response
· Active 24dB/Octave electronic crossover
· 3-band EQ, Mic/Line selector with dedicated Gain control knob,Volume control knob
· Rugged injection-molded polypropylene enclosure, low profiletrapezoidal design allows for use as stage monitor
· Built-in anchor points for wall or ceiling mounting
· Professional balanced inputs withNeutrik TM combo connections and XLR link out
Technical Specs:
Active or Passive
Active
Frequency Response
40 Hz - 20 kHz
Power Capacity
LF: 700 Watts
HF: 200 Watts
Maximum Sound Pressure Level (SPL)
128dB
Nominal Sensitivity
98dB
Impedance
22 kOhm
Crossover
Active, 1.3 kHz
Low Frequency Driver
15" custom woofer with Neodymium magnet
High Frequency Driver
1" horn-loaded Compression Driver
Enclosure Material
Polypropylene with gas injection molding
Input Connections
1 x 3-pin XLR/1/4" TRS Combo
1 x 3-pin XLR Male Link Output
Dimensions
29.8 x 19 x 15.7" (757 x 482 x399mm)
Weight
63.9 lb (29 kg)
Specialties
Advanced Dynamic Active Protection Circuitry
Bi-Amplified
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
| Listed | 6 years ago |
| Condition | Very Good (Used) Very Good items may show a few slight marks or scratches but are fully functional and in overall great shape.Learn more |
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Year |
|
| Made In |
|
