G-Storm Electro JU60-VCF Eurorack Analog Filter Module

JU60-VCF is an analog 4-pole low pass filter adaptation of Roland Juno-6/60 using a vintage IR3109 chip with a BA662 OTA chip in the resonance feedback loop.  This topology was also used on the Jupiter-8, with a switch for tapping the 2-pole mode.  Resonance will self-oscillate and produces a nice sine wave alone.  JU60-VCF won’t turn your system into a polyphonic synth, but it has a classic sound at a sweet price.

FREQUENCY | the initial Cutoff Frequency of the filter

RESONANCE | the depth of the peak frequency resonant feedback

IN1 & IN2 | Mix together 2 different audio signals, each w/ their own mix pot.

CV1 & CV2 | Modulate the Cutoff Frequency w/ any polar/bi-polar mod source. 

MODE | Select between lowpass 2-pole or 4-pole operation.

OUT | the audio output jack of the filter

Includes a 10-pin to 16-pin Eurorack ribbon connector

8HP Module width
24 mm Module depth
25 mA on +12V
25 mA on -12V
0ma on 5V (not used)

JU60-VCF pairs well with:

• GSE 2xVCA
• 101-VCO r2 (coming in 2023)
• Feedback Modules 106-Chorus