Where Mesa's passion for Design Excellence and Portability meets the demand for Great Tone in a simple, accessible package the next chapter in the MESA/Boogie Bass Story awaits; Handcrafted in Petaluma, California, Mesa's Lightweight Italian Poplar Cabinets are Tuned and loaded with the following features:

Features:

- Designed & Handcrafted in Petaluma, California

- Tuned Front Ported Tri-Port Porting with Aviation style bracing (superior strength/reduced weight)

- Lightweight Italian Poplar Cabinets Legendary Mesa Quality Construction

- Custom Subway Neodymium Speakers & High Frequency Horn with Premium Attenuator

- Combination speakON & 1/4" Input and Parallel Output

- Recessed, Flip-Out Metal Handles

- Black Bronco Vinyl with Black Metal Grille

- Lexan Corners

- Slip Cover

- Cabinet Material: Light-Weight Italian Poplar

- Finish: Black Bronco

- Corner Material: Lexan

- Style/Type: Tuned Front Ported Tri-Porting (2 x 4.85" square x 4.5" deep / port area = 48.0 sq. in.)

- Cabinet Internal Volume: 5.44 CF

- Speaker(s) & Mounting Position: Subway Neodymium Speakers / Front Mounted

- High Frequency Horn: Yes

- Horn Control: Premium Attenuator

- Input/Output Connectors (speakON Connectors wired 1+/1-): 2 x speakON-1/4" (NL-4 combo)

- Nominal Impedance (Average impedance normalized up to standard value): 4 ohms (only)

- Minimum Impedance @ Frequency (Minimum cabinet impedance value from 20Hz - 5kHz): 3.41 ohms (@ 40.9Hz)

- Average Sensitivity (RMS) 50Hz-1000Hz (Average sensitivity based on an RMS signal from 50Hz - 5kHz): 100.4dB/1W/1M

- Maximum SPL - 50Hz-1000Hz (Maximum SPL calculated from average sensitivity and maximum RMS input power): 129.5dB/1M

- Average Thermal Power (RMS) 50Hz-1000Hz (Power rating ("RMS") of L.F. driver based on EIA RS-426A standard): 800 Watts

- Average Mechanical Power (RMS) 50Hz-1000Hz (Average power rating ("RMS") based on average safe cone excursion): 800 Watts

- Minimum Mechanical Power (RMS) @ Frequency (Power rating ("RMS") based on point of maximum safe cone excursion): 800 Watts (@ 68.0Hz)

- Low Freq F3 (Hz) (-3dB point of the LF response below the average response): 57.2Hz

- Low Freq F6 (Hz) (-6dB point of the LF response below the average response): 47.2Hz

- Low Freq F10 (Hz) (-10dB point of the LF response below the average response): 38.6Hz

- High Freq Response (Nominal HF response, dependent on the position of HF attenuator): >12kHz

- Transport Assistance: Included - Built-in Tilt & Roll Transport System with Rear Glide Rails

- Slip Cover: Included - Fitted Slip Cover

- Size: 34 3/8" x 19 1/4" x 19 1/2"

- Weight: 60 lbs