Similar Listings

Haslett, MI, United States
$220
Haslett, MI, United States
$220
Haslett, MI, United States
$220
Haslett, MI, United States
$220
Haslett, MI, United States
$220
Haslett, MI, United States
$220
Fairfax, VA, United States
$240
Takoma Park, MD, United States
Originally $300, now $280 ($20 price drop)
Long Beach, CA, United States
$220
Haslett, MI, United States
$330

Promoted Similar Listings













USB MIDI IS NOW FIXED ON M1 MACs running Ventura 13.0.1.  USB Hub workaround works on previous M1 MacOS versions

  • New Pattern case with Rear mounted I/O
  • USB C Connection
  • Online parameter editor:
  • Edit Midi CC# per channel on USB MIDI and TRS MIDI Outputs
  • Set MIDI CC Range
  • Adjust I2C Leader/Follower Mode
  • Adjust boot delay 
  • Improved I2C stability for Disting
  • USB MIDI thru to TRS MIDI

XVI Desktop is a 16 channel desktop control surface.  

Features:

  • Long throw LED 60mm faders
  • 0-5V, 0-10V, -5 to +5V CV ranges per channel
  • USB Powered (USB C, Cable included)
  • Fully analog CV outputs
  • I2C communications as leader or follower
  • 1x Fully buffered I2C Port for longer cable runs. (3.5mm TRS)
  • USB MIDI and TRS A MIDI (can be used simultaneously with different mappings)
  • I2C, MIDI, and CV can be used simultaneously
  • Enclosure is 220mmx125mmx31mm
  • Black case/Red LEDS, White Case/White LEDs.  LEDs are user replaceable,  different color LEDs available separately
  • Includes: XVI Desktop Unit, 1.5m USB C to USB A Cable, 1.5m TRS A Midi to MIDI Cable

IMPORTANT: This device requires a USC C 5V power supply which supplies 500mA or more (not included) for stand alone use.  It is NOT recommend for use with passive USB hubs, only powered ones.

Other Important note:  As of Serial#4161, all devices have TRS MIDI A.   The spec has been official for a while now so all MiSW devices will conform to TRS MIDI A.  Both types of cables will be available in the shop

Basic Usage instructions:

Front:

Voltage Select switches:  Independent for each channel. Does NOT affect MIDI/I2C data

Slider LED color: To change the LED color, simply remove the cap and rotate the square LED 180s.  Do NOT force the LED back in, it should slide in easily, may require wiggling.

Back I/O:

USB: USB C connection for power and/or connection to computer.  For use, simply connect to a 5V USB wall wart, 500 mA min (not included).  The device is a class compliant MIDI device and requires no drivers.

I2C: 2 buffered I2C port.  

PCB Rear:

Power backpack: This is the power supply for the device.  When converting to the eurorack configuration simply remove.  There is a standard 10pin power header below.



 Includes 1.5m USB C Cable, 1.5m TRS A to DIN5 MIDI cable

Please Note:
This device uses PSIpower and has NO POLAIRTY on the power header, it can be installed EITHER WAY

UPGRADE INSTRUCTIONS FOR 1.xx Devices:

 New 1 November 2021

press the reset twice with USB connected, copy the firmware file to the folder that pops up, it will confirm and the window will close automatically.

The firmware is now unified for F8R and XVI, to identify the device as XVI, DIP switch #4 must be switched to ON

THIS REQUIRES OPENING THE UNIT TO ACCESS THE DIP SWITCH, please contact Michigan Synth Works if you need assistance with opening the device.

THE DIP SWITCH IS NOW DEPRCIATED, ALL FUNCTIONS IT SERVED ARE NOW DONE VIA WEB EDITOR.  The ONLY function is serves now is to identify the unit as 16 channel instead of 8: if only 8 channels are showing up in the editor that means you did not switch DIP channel #4 to on.  Mid 2021+ Devices do NOT have this switch


 

FIRMWARE UPDATES:


Firmware update procedure:  Connect the Mini USB to your computer and press the blue reset button on the back of the module twice (quickly), it is accessible through a small hole in the desktop version.  A new drive will appear on your computer, simply copy the firmware file to that drive (it will give you a warning about copying a file without properties).  The drive will disappear once the file is copied and the module will reboot with the new firmware.

CURRENT FIRMWARE VERSION: 2.03 

Open Source Licenses:

designed by Adafruit Industries and released under the

Portions of the code used for this device come from the  by , , and   released under the

ConditionBrand New (New)
Brand New items are sold by an authorized dealer or original builder and include all original packaging.learn more
Brand
Model
  • XVI Desktop USB 16 Channel Fader Bank with CV, I2C, and MIDI -
Finish
  • Black
Categories

Michigan Synth Works

Haslett, MI, United States
Sales:1,093
Joined Reverb:2015

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

Oops, looks like you forgot something. Please check the fields highlighted in red.