Apogee Symphony I/O MKII Pro Tools Multi-Channel Audio Interface 345905 805676302126

• Mini-DigiLink Connectivity
  
• Includes 2x6 SE I/O Card
  
• High-Performance A/D-D/A Conversion
  
• Two Analog Inputs, Six Analog Outputs
  
• AES, ADAT, and S/PDIF Digital I/O
  
• Front-Panel Touchscreen w/ TFT Display
  
• Multi-Function Control Knob
  
• 1/4" Headphone Output
  
• Up to 192 kHz Sample Rate
  
• Compatible with Pro Tools HD Systems

The Apogee Electronics Symphony I/O Mk II Pro Tools Audio Interface with Special Edition 2x6 Analog I/O and 8x8 Digital I/O is an audio interface designed to deliver high-performance A/D and D/A conversion at up to 192 kHz for mixing and mastering engineers using Pro Tools HD systems in personal, project, and commercial studios. The included 2x6 SE I/O card features stunning dynamic range with low distortion and noise for mastering-grade sonic quality.

Its analog I/O includes two inputs on XLR 3-pin jacks and six outputs on a DB25 connector. Additional XLR, TOSLINK optical, and RCA coaxial jacks provide connectivity for AES/EBU, ADAT, and S/PDIF digital inputs and outputs. The chassis utilizes Mini-DigiLink connectivity for high-speed data transfer rates and compatibility with your Pro Tools HD hardware. Its front panel presents a TFT touchscreen display, multi-function control knob, and convenient 1/4" stereo headphone output.

The Apogee Electronics Symphony I/O Mk II Pro Tools Chassis is an audio interface chassis designed to provide direct connectivity to Pro Tools HD systems for recording and mixing engineers in broadcast, post-production, studio, and live stage applications. It features a Mini-DigiLink port in the pre-installed HD option card, BNC loop sync I/O, and BNC word clock I/O. A stereo 1/4" headphone jack enables quick and effective monitoring with a variety of headphone impedances.

Emulating an Avid HD I/O interface, it ensures seamless integration and sample-accurate delay compensation while delivering ultra-low latency for proper timing in signal conversion. Configure and control the chassis via the color touchscreen display and large rotary control on the front panel. Install multiple I/O cards (available separately) for up to thirty-two channels of analog inputs and outputs.

The Symphony I/O MkII is made in the USA and ships with a power cable.

• Pre-installed HD option card allows Mini-DigiLink connectivity to your Pro Tools HDX, HD Native, or Core/Accel system
• Emulates Avid HD I/O
• Ultra-low latency performance
• Sample-accurate delay compensation
• Stereo 1/4" headphone jack features Apogee's proprietary Constant Current Drive for smooth frequency response with any headphones
• Color touchscreen display
• Large front panel control for quick adjustment of selected parameter
• Supports multiple I/O cards for up to 32 channels of analog inputs and outputs
• BNC loop sync I/O for synchronizing multiple Pro Tools HD audio interfaces
• BNC word clock I/O for synchronizing external equipment
• Designed in California, made in the USA

• Form Factor: Rackmount
• Display: Touchscreen
• Channels of I/O: None
• Maximum Sampling Rate: 192 kHz / 24-Bit
• Number of Microphone Preamps: None
• Built-In Microphone: None
• Expansion Slots: None
• Pad: None
• High-Pass Filter: None
• Solo/Mute: None
• Analog Audio I/O: 1 x 1/4" TRS Headphone Output
• Phantom Power: None
• Digital Audio I/O: None
• Host Connection / USB: 1 x DigiLink Mini, 1 x USB-B
• Host Connection Protocol: Avid Proprietary
• USB (Non-Host): None
• Sync I/O: 1 x BNC Loop Sync Input, 1 x BNC Loop Sync Output
• 1 x BNC Word Clock Input, 1 x BNC Word Clock Output
• Network I/O: None
• MIDI I/O: None
• Wireless Connectivity: None
• Maximum Input Level A/D Converters: +24 dBu (+4 dBu) +6 dBu (-10 dBV)
• Impedance D/A Converters: 50 Ohms. THD+N -110 dB (+19 dBu Input, 600-Ohm Load) -101 dB (+14 dBu Input, 32-Ohm Load)
• Sample Rates: 192 kHz
• Sample Rate Conversion: None
• Bit Depths: 24-Bit
• Sync Sources: None
• Memory Card Slot: None
• OS Compatibility: macOS, Windows
• Included Software: None
• Compatible Software (Not Included): Any Core Audio (Mac) Compliant Software Pro Tools HD 9+
• Included Plug-Ins: None
• Supported Drivers/API & Plug-Ins: macOS Class-Compliant (No Driver Needed)
• Mobile Device Compatibility: None
• Power Requirements: AC/DC Power Adapter (Included)
• AC Input Power: 90 to 240 VAC, 50 / 60 Hz
• Power Consumption: 150 W

• Apogee Electronics Symphony I/O MkII Pro Tools HD Chassis (No I/O Modules)
  
• Power Cable
  
• Limited 1-Year Warranty
  
• Apogee Electronics 2x6 SE Special Edition Mastering I/O Card for Symphony I/O Mk II
  
• Limited 1-Year Warranty