Bose L1 Model II w/2B1 Linear Array Speaker System - New - Planet Acoustic

Brand New
$2,798
Free Shipping
As low as $91/month with
1
10 in stock
This seller is open to offers

Buy With Confidence

Reverb Protection has you covered. We provide a safe community for finding the gear you want.

Shipped From
Planet Acoustic
Columbia, KY, United States
18
Sales
50+
Joined Reverb
2017
Quick Shipper

About This Listing

The L1 model II system is the most advanced out of the L1 series and will provide clean, smooth sound for an audience of up to 500. With a 24-speaker articulated line array providing 180 degrees clear, even coverage, it combines the best sound reproduction with easy transport and setup. Designed to work with the T1 ToneMatch® audio engine, which provides four additional inputs, Bose's largest library of ToneMatch presets and a complete suite of studio-class effects and processing.

What's in the box:
  • L1 Model II power stand with chord
  • Power stand carry bag
  • L1 Model II cylindrical speaker radiator (top and bottom)
  • Loudspeaker carry bags
  • Two B1 bass modules with chords
  • Bass Module slip covers

Sound Advantages—Only From Bose

The system's breakthrough loudspeaker produces wide, uniform sound coverage of nearly 180 degrees—onstage and throughout an audience of up to several hundred—with little dropoff in volume and tone.

The Model II system also features Articulated Array speaker technology for better tonal balance. The loudspeaker's 24 vertically mounted drivers are precisely angled to create clearer highs and more consistent tone in the room. Even people off to the sides of these stage speakers enjoy well-balanced, detailed sound.

Deep bass from small enclosures

The B1 bass module is our more portable bass option. It is considerably lighter and smaller than conventional bass bins required for the same performance. And it ensures more accurate amplification of lower notes for most voices and instruments.

With the L1 Model II system you can power up to two B1 bass modules or one B2 module on a single power stand. And the optional PackLite® power amplifier lets you add a second B2 bass module for maximum low-end power.

Easy and efficient

The L1 Model II power stand weighs only 24 pounds, and its four retractable legs make it easy to transport and set up. The power stand also has a simplified control section; the single line-level input can be used with instruments, mics, mixers, laptops, MP3 players or DVD systems.

All of the system's components are also built to handle the road. The loudspeaker has a rugged, reinforced grille, and each package includes padded carrying bags for major components.

Multichannel flexibility

The optional T1 ToneMatch audio engine adds four more channels, so you can expand the system and connect additional instruments and microphones. You can also use the ToneMatch engine to fine-tune your sound with powerful, proprietary tone-shaping tools.

Dimensions: L1 Model II Cylindrical Radiator® loudspeaker top

43.5"H x 3.5"W x 4"D ( 110.5 cm x 9 cm x 10.5 cm )

16.3 lbs (7.4 kg)

L1 Model II Cylindrical Radiator® loudspeaker bottom

43.5"H x 3.5"W x 4"D ( 110.5 cm x 9 cm x 10.5 cm )

17.4 lbs (7.9 kg)

L1 Model II power stand

5"H x 10"W x 27"D ( 12.8 cm x 26.2 cm x 69.2 cm )

23.7 lbs (10.7 kg)

B1 bass module

15"H x 10.25"W x 17.75"D ( 38 cm x 26 cm x 45 cm )

25.1 lbs (11.4 kg)


Technical Specifications

  • Nominal Dispersion: 195° H x 0° V
  • Maximum SPL @ 1 m2: 115 dB SPL (121 dB SPL peak)
  • Crossover Frequency: 200 Hz (24 dB / octave)

Amplification

  • System Power Rating: 500 W
  • Low-Frequency Amplifier: 250 W
  • High-Frequency Amplifier: 250 W
  • Distortion at Rated Power: 0.1 % Max (30 Hz - 15 kHz)
  • System Limiter: Dynamic limiter
  • Overload Protection: Fuse/MOV/NTC/PTC
  • Power Indicator: Blue LED: system on, Red LED: fault

Transducers: Driver Compliment Cylindrical Radiator® loudspeakers: Twenty-four (24) 2.25" (57 mm) HF drivers B1 bass module: Two (2) 5.25" (133 mm) LF drivers (8 Ω) B2 bass module: Two (2) 10" (254 mm) LF drivers (4 Ω)


Channel
  • Signal Indicators: Analog signal/clip LED: Green: signal present, Yellow: -3 dB below clip, Red: clip (limiter active)
  • Trim: +14 dB @ max
  • Input: 1/4" - TS unbalanced or TRS balanced
  • Channel Gain (1/4" input): -50 dB to +28 dB (line)
  • Maximum Input Signal: +24 dBu (balanced)
  • Input Impedance: 10 kΩ +/- 10 % (unbalanced)
Additional Connections
  • Bass Module out (for B1 or B2 only): NL4 connector (all pins wired, two for audio, two for auto sensing). Bass output signal for driving up to two B1 bass modules (one B1 bass module = 8 Ω) (two B1 bass modules = 4 Ω) or one B2 bass module (4 Ω)
  • Bass Line Output: Post-DSP bass signal output. Accepts a 1/4" TRS cable. Supplies low frequency signal for connecting a PackLite® power amplifier or powered sub woofer.
  • ToneMatch Port: CAT5 Ethernet cable with RJ45 connection providing digital audio and power connection for the optional T1 ToneMatch audio engine
  • AC Mains: IEC connector


Product Specs

ConditionBrand New (New)
Brand New items are sold by an authorized dealer or original builder and include all original packaging.learn more
Brand
Model
Finish
Categories

Seller Reviews

18

Watch a Video

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

iOS app store button
Android play store button