




















Up for sale is a fully-functional and mint Warmoth/Fender Stratocaster with a factory-applied black gloss finish on a genuine Fender alder body and quartersawn maple Warmoth neck with a Fatback profile (similar to vintage Fender deep "U"), quartersawn maple fret board, stainless steel frets, Gotoh Side Adjustment Mechanism and an Earvana Compensated Nut, Wilkinson/Gotoh VSVG Vintage Tremelo, Hipshot Staggered Grip-Lock Tuners and Fender Ultra Noiseless Vintage pickups. I assembled this guitar with some of the best quality parts available in 2022.
***Please note that I'm not a luthier and the guitar is assembled from high quality parts. Thus, I did not build the body nor the neck as it was purchased from Warmoth and Fender.****
***Please note that the neck has a Fatback profile which is the thickest, roundest neck profile offered by Warmoth for players that love a fat vintage feel. The profile is a similar to Vintage Fender deep "U" and is 1.00" thick at the 1st fret and 1.00" at the 12th fret.****
***Please note this listing is only for the guitar as it does not have a case. However, I will package the guitar well prior to shipment using Stewmac's guitar shipping system.***
***Please note that the body has been routed with deeper pickup cavities in order to accommodate the taller Fender Ultra Noiseless Vintage pickups (please refer to images for reference)***
***Please note that this guitar will benefit from a professional setup. Currently, it has a standard Fender Stratocaster setup***
Warmoth/Fender Stratocaster Specs:
Neck:
-Warmoth Strat Replacement Neck
-Neck Construction: Modern with Gotoh Side Adjust Mechanism
-Shaft Wood: Quartersawn Maple
-Fretboard Wood: Quartersawn Maple
-Neck Profile: Fatback (similar to vintage Fender deep "U" profile)
-Nut Width: 1-11/16" (43mm) – Modern Medium
-Frets: SS6105 Narrow & Tall (Stainless Steel)
-Number of Frets: 22
-Neck Radius: 10-16” Compound Radius
-Finish: No finish (only very light coat of Tru-Oil)
-Inlay Material: Black Standard Dots, Black Side Dot
-Scale: 25-1/2”
-Nut: Earvana Compensated Nut - Graphtech Black TUSQ XL
-Right Handed
-Tuners: Hipshot Grip-Lock (Locking) Staggered - Black
-Country of Origin: USA
Body:
-Genuine Fender Classic Series 60’s Stratocaster Body (routed to accommodate Fender Ultra Noiseless Vintage Pickups – refer to images)
-Body Construction: Stratocaster
-Wood Type: Alder
-Finish: Black Polyester Gloss
-Orientation: Right Handed
-Country of Origin: Mexico
Pickups:
-Fender Ultra Noiseless Vintage Stratocaster Pickups
-Description: The sound of Fender’s flagship instruments. Fender Ultra Noiseless pickups are the pinnacle in stacked single-coil design, crafted with new winding techniques for livelier and more expansive tone. Alnico 5 magnets with polysol wire deliver a vintage voice with classic bell-like chime without the 60-cycle hum. Ultra Noiseless Vintage Strat SSS pickups feature lower output for classic Stratocaster tone without the hum.
-Features:
-Polysol coated magnet wire
-Staggered non-beveled polepieces for string-to-string balance
-Alnico 5 magnets for greater focus and enhanced dynamics
-Magnet Type: Alnico 5
-Output: Vintage
-DC Resistance: Neck/Middle: 7.9 - 8.7k, Bridge: 9.2 - 10.0k
-Inductance: Neck/Middle: 2.1 – 2.5H, Bridge: 2.8 – 3.2H
-Lead Wire: Vinyl-covered
-Tone: Modern
-Configuration: SSS
-Magnet Wire: Polysol-coated
-Pole Pieces: Staggered unbeveled
Electronics:
(1) CTS 250K 450G series – 10% Tolerance – volume pot with solid brass bushings and shaft
(2) CTS 250K 450G series – 10% Tolerance – tone pots with solid brass bushings and shaft
(1) 5-Way Selector Switch
-Polypropylene Tone Capacitor
Bridge:
-Wilkinson/Gotoh VSVG Vintage Temelo
-Finish: Gold
-Features: The baseplate holes are elongated so the screws won’t bind, for smooth, accurate pitch return. For tuning stability, the string mounting holes are staggered in the steel block for more consistent string angle over the adjustable locking bent-steel saddles.
Accessories:
-Fender Modern Strat Pickguard (plastic still attached)
-D’addario/Planet Waves Elliptical End Pins, Gold
-Genuine Fender Tremelo Cover Plate, 3-ply
-Genuine Fender Neck Plate, Gold
Strings:
Ernie Ball Super Slinky Nickel Wound Strings (Gauge: 9-46)
Weight:
8.7 LBS.
Country of Origin (Neck and Body):
USA/Mexico
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
Listed | 3 years ago |
Condition | Mint (Used) Mint items are in essentially new original condition but have been opened or played.Learn more |
Brand | |
Model |
|
Finish |
|
Categories | |
Year |
|
Made In |
|
Fretboard Material |
|
Pickup Configuration |
|
Right / Left Handed |
|
Body Shape |
|
Number of Strings |
|
Neck Material |
|
Offset Body |
|
Wood Top Style |
|
Finish Style |
|
Body Type |
|
Body Material |
|
Bridge/Tailpiece Type |
|
Scale Length |
|
Neck Construction |
|
Product safety information may be available here.