YAMAHA 2PC AMPLIFIER CA-810 + TUNER CT-810 SERVICED FULLY RECAPPED+ LED's MINT

YOU ARE BIDDING ON YAMAHA 2PC AMPLIFIER CA-810 + TUNER CT-810 PRO SERVICED FULLY RECAPPED AND NEW LED's
BOTH UNITS ARE IN EXCELLENT COSMETIC CONDITION MINT
LIGHTS UP NICELY
WORKS PERFECT
FULLY RE-CAPPED All electrolytic capacitors have been replaced with Elna and Nichicon Gold capacitors, DC offset and Bias have been adjusted to factory specs and all solder joints re-soldered, unit serviced to new condition

SHIPPING TO USA AND CANADA $50
INTERNATIONAL BUYERS MUST EMAIL FOR SHIPPING COST Description Amplifier

• When you have musicians and audio engineers speaking the same language the result is full natural sound fidelity, plus innovative features which translate directly into improved tonality or operating convenience.

  Yamaha's insistence on total music performance, not just isolated specs, is behind a revolutionary new approach to audio component design; one that gives the CA-810 integrated amplifier (as well as all other models in the line) music fidelity audibly superior to many separate preamp and power amplifier combinations.

  Instead of putting our development muscle into the power amp section alone, Yamaha engineers paid the same attention to every section, including the phono equalizer and preamp stages.

  By designing each section to the same high standards we made sure there are no weak links in the CA-810; at the same time we matched each section from its very first design stages to the others, so they all work together for superb music fidelity.

  That's why we dare to publish overall performance specifications, from Phono In to Speaker Out.

Specifications

• Power output: 65 watts per channel into 8Ω (stereo)

  Frequency response: 10Hz to 100kHz

  Total harmonic distortion: 0.05%

  Damping factor: 30

  Input sensitivity: 0.6mV (MC), 2.5mV (MM), 150mV (line)

  Signal to noise ratio: 73dB (MC), 83dB (MM), 100dB (line)

  Channel separation: 55dB (line)

  Output: 150mV (line), 1V (Pre out)

  Dimensions: 435 x 337 x 160mm

  Weight: 12kg

Description Tuner The CT-7000, a super sophisticated audio component for the spare no expenses audiophile, first astonished fans and experts with Yamaha's advanced tuner technology, novel features, and ultra low distortion natural sound.

Now, in the CT-810, the spin off from our CT-7000 development program makes the same performance advantages available to a far wider circle of fans.

The unusual CT-810 front end circuitry and components pick up the most distant, low signal strength stations with surprisingly high signal to noise ratio, excellent stability, and rejection of all forms of interference.

This pays off in a much wider choice of stations, and greatly increased listening enjoyment.

And not even powerful local stations can seriously overload the CT-810, so that reception is uniformly good in any area.

The front end keeps the incoming signal clean and clear of external interference, and the IF stage is specially designed to prevent internally generated spurious signals from degrading quality.

Specifications

Type: Mono/Stereo Tuner

Tuning Bands: FM, MW

Tuning Scale: Analogue

FM Tuning Range: 87.6 to 108 MHz

MW Tuning Range: 525 to 1605 kHz

Sensitivity: 0.9uV (FM), 300uV (MW)

Signal to Noise Ratio: 69dB (FM), 50dB (MW)

Distortion: 0.2% (FM), 0.4% (MW)

Selectivity: 60dB (FM), 30dB (MW)

Frequency response: 30Hz to 15kHz (FM)

Output: 500mV (FM), 125mV (MW)

Semiconductors: 29 x transistors, 4 x IC, 3 x FET, 11 x diodes, 4 x zener diodes, 3 x LED

Dimensions: 435 x 160 x 349mm

Weight: 5.9kg