FREE USPS PRIORITY SHIPPING IN THE U.S.!

We are an Authorized Roger Mayer Dealer. Thank you for checking out our sale here for a BRAND NEW in box Roger Mayer Voodoo-Bass Classic.

It is extremely popular for use with Bass Guitar where it is used to provide both distortion and compression without loosing any of the Bass Guitars original tone and retaining the rich low end.. It has become the No.1 Bass Pedal in Japan where it is the norm for serious Hard Rock and Metal Bass Players who are rediscovering the joys of adding both compression and distortion to their sound.
Electronically the Voodoo-Bass and Voodoo-1 each share all the same features but the equalisation sections have been altered to provide a completely different set of optimised tone response .

It can also be used with regular guitars where the added gutsier bass equalisation enables players who favour single coil pickups to reproduce quite effortlessly the rounded, bluesy sound of classic pickups such as the Gibson P90. The comprehensive Gain and Tone variation provided by the Voodoo-Bass enable a very wide range of distortion sounds to be created from the compressed, just clipped sustain of traditional Chicago Blue to the sweet scream of full tube overload. 
Electronically the Voodoo-Bass shares all the same basic Voodoo Series features with dual output buffering or hard wire output etc. The distortion section uses a unique combination of the best discrete and IC design techniques to emulate the type of distortion found on many classic tube amplifiers. It allows the player to create a wide range of distortion effects from mild to extreme whilst reacting to the most subtle nuances in touch and playing.

The Voodoo-Bass is housed in our Classic Style enclosure with both dual direct drive buffered outputs or hard wire output and has provision for an internal 9-Volt Battery (battery life 150Hrs) or can be powered from a 9-Volt DC Power Adapter (not supplied). Extensive internal filtering ensures that noise free operation is maintained even with the most basic of adapters. The dual direct drive outputs are capable of driving very long leads without any loss and in fact you can use a speaker lead for the outputs if you want without any hum. This direct drive true bypass feature is standard on all our voodoo series and in effect reduces the output lead length to zero. This results in greater detail and fidelity than using two long lengths of guitar leads in traditional hard wire bypass set-ups. The problem of cable noise induced by vibration on stage is eliminated together with electrical magnetic interference induced into shielded cables from lighting rigs etc. Possibly of more importance there is no tone sucking at all from the output length of guitar cable. After all the ultimate guitar cable would have a lead length of zero, and guitar players can detect the difference between long and short cables easily. The overall signal quality in the unit is thus guaranteed right up to amplifier and this overall performance exceeds any other method in use today. When using a Voodoo-Bass as the last device in a signal chain the distance to the amp does not come into consideration and long leads can be used successfully in recording situations e.g.: playing in the control room. 

FEATURES : 

MULTI-MODE OUTPUTS / HARD WIRE BYPASS/ TWO BUFFERED OUTPUTS : 
The Voodoo-1 has a true hard wire output plus two buffered outputs that can drive long cable lengths with no high frequency loss. These buffered outputs are disconnected when the hard wire output is being used. This means that all performance situations are catered for whether you want a true hard wire output or your situation calls for the advantages of buffered outputs. 

BATTERY LIFE :
150Hrs or more using a premium grade alkaline 9 Volt type. 

EXTERNAL POWER ADAPTER / SUPPLY : An external AC adapter (not supplied) can be used and access is through a standard DC power jack ( 2.1mm centre pin ) situated next to the jack sockets. Internal onboard filtering ensures that optimum low noise performance is maintained and diode protection provides peace of mind in case of polarity setting mistakes. 
Connection protocol: It uses the standard negative centre pin connection protocol used by many leading manufacturers. 
Specifications: 9 volt DC. Regulated output is recommended. 
Current rating: 50mA or more. 

ERGONOMIC DESIGN :
This new reduction in footprint area together with the jack sockets in the conventional position makes the integration into pedal boards very efficient. For a futher reduction in footprint consider our new TC Version of our popular models. 

Size: Width 95 x Depth 120x Height 57mm. Weight: 350g .