Package Includes
  • 2x RCF NX 912-A 12" DJ / Live Sound 2-Way Active Speaker 2100 Watts w/ Integrated DSP
  • 2x 25FT XLR CAble with Cable Ties
Features
  • Up to 130 dB Sound Pressure Level
  • 2100W Class-D Bi-Amplification
  • 50-20000 Hz linear frequency response
  • 1.75" Compression Driver
  • 12" Woofer
  • FiRPHASE zero degrees phase technology
  • Bass Motion Control woofer excursion management

NX 912-A is masterfully engineered from the ground up to deliver stellar audio performance for solo musicians, bands, and DJs. The combination of 1.75" compression driver, 12" woofer, two-channel 2100W amplifier, and a constant directivity waveguide produces coherent 100° x 60° coverage for the listening area with up to 130 dB SPL of distortion-free sound. Used stand-alone speaker for a FOH system, satellite (with subwoofer), stage monitor, or flown speaker, the NX 912-A blends high-performance and reliability in a compact package. Blending RCF proprietary FiRPHASE and Bass Motion Control DSP processing, NX 9 Series speakers are perfectly tuned for each model, delivering absolute clarity and deep, powerful bass response. The tour-ready, rugged all-wood cabinet is easy to carry and secure to install on a pole-, flown-, wall-, or truss-mounted using the dedicated rigging points available.

Power that moves The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2100W power, the 2-channel NX 9 Class-D amplifier is 50% more powerful than previous models, able to manage extreme sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. NX 9 is energy-efficient so there's no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the rear of the cabinet - with no moving parts. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All NX 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight. Superior transducers Lightweight and powerful, RCF drivers are a reference in high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components. The new 1.75" voice coil design with Polyimide-Kapton dome features a new bonding technology and reinforcement ribs making it 10 times more rigid than previous models, for increased accuracy and durability. The redesigned phase plug increases sound clarity with less distortion. Low-frequency transducer design gains more stability over higher currents, with less distortion and better heat handling. Bass Motion Control When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.

The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules. New perspective on linearity RCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener.
The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system. Specifications Configuration
  • Active 2-Way
Enclosure Type
  • Bass-Reflex Loudspeaker/Floor Monitor
Total Power Capacity
  • 2100 W Peak
Amplifier Power Rating
  • LF:
    1400 W Peak
    HF:
    700 W Peak
Amplifier Class
  • Class-D
Drivers HF Driver
  • 1 x 1" / 25.4 mm Polyimide Compression Driver
HF Voice Coil
  • 1.75" / 44.45 mm
MF Driver
  • None
LF Driver
  • 1 x 12" / 304.8 mm Woofer
LF Voice Coil
  • 2.5" / 63.5 mm
Magnet
  • Neodymium
Performance Frequency Response
  • 50 Hz to 20 kHz
Maximum SPL
  • 130 dB (Peak)
Coverage Angle
  • 100° H x 60° V
Input Sensitivity
  • +4 dBu to -2 dBu
Protections
  • RMS, Signal Limiter, Thermal
Connectivity Audio I/O
  • 1 x Combo XLR-1/4" TRS Female Balanced/Unbalanced Input
    1 x XLR 3-Pin Male Balanced Thru/Output
Network I/O
  • None
USB
  • None
Wireless Connectivity
  • None
Signal Processing Crossover
  • 1600 Hz (Internal)
EQ
  • None
Parametric EQ
  • None
Semi-Parametric EQ
  • None
Dynamic Processing
  • Soft Limiter
Alignment Delay
  • None
Phase Adjustment
  • None
Digital Signal Processing
  • FIR Filter, Venue Settings
Power AC Input Power
  • 100 to 120 VAC, 60 Hz 
AC Power Connector
  • 1 x powerCON Input
Power Consumption
  • 300 W
Physical Mounting
  • 2 x M10 Fly Point (Top)
    1 x M10 Fly Point (Each Side)
    1 x M10 Fly Point (Bottom)
    1 x M10 Fly Point (Rear)
    1 x Pole Socket (Bottom)
Handles
  • 1 x Each Side
Cooling
  • Convection, Heat Sink
Construction Material
  • Plywood, Stainless Steel Grille
Dimensions
  • 24.4 x 15.9 x 14.3" / 619.8 x 403.9 x 363.2 mm
Weight
  • 45.9 lb / 20.8 kg
Packaging Info Package Weight
  • 52 lb
Box Dimensions (LxWxH)
  • 26.5 x 16.5 x 16.5"

ConditionBrand New (New)
Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more
Brand
Model
  • NX 912-A 12" Powered Loudspeaker
Categories

VIP PRO AUDIO INC

Brooklyn, NY, United States
Sales:4,582
Joined Reverb:2015

Reverb Protection

Simple Returns, Secure Transactions, Human Support

Learn more

Secure Checkout

Product Reviews

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

Oops, looks like you forgot something. Please check the fields highlighted in red.