Epic H.H. Scott PS-97XV Handmade Turntable Burl Mappa Poplar Veneer GoRgEoUs Audiophile Flagship
This gear has sold
See similar gear from other Reverb sellers
Listed:4 years ago
Views:3,302
Saves:24
Offers:11
North Cesterfield, VA, United States
Our users rate Reverb
One-of-a-kind piece of functional art.
Massively upgraded, fully automatic, direct-drive, quartz-locked - keeps perfect speed. Just push a button to start - that's it!
This table was originally manufactured by Micro Seiki for H.H. Scott.
It took me five years of searching to find two of these in excellent condition. I wanted two to make it worthwhile to build all-new plinths (the other one I have is quilted maple - check it out!)
This plinth is 100% handmade with a new MDF base covered in hand-cut RAW mappa burl veneer - not paper backed. Mappa burl, from the European poplar trees - Populus nigra. Finished in a multi-stage process, including the lettering.
Completely new base, custom-made for this ultra-rare model. The original was actually in near-perfect condition - this was a phenomenal donor table to make into a custom job. The interior was dust-free and looked like new when I opened it up.
New dust cover custom fabricated.
No expense or time spared to make this table as perfect as possible. I dare you to find a prettier table.
Fully cleaned, lubricated and adjusted. Tonearm lift lubed with 300,000 weight silicone dampening fluid.
Original spring-loaded rubber feet replaced with a three-piece custom setup - half inch sorbotane discs sit upon a billet aluminum foot, which sits on sorbothane rings. Sorbothane is the most vibration absorbent material money can buy for a turntable.
Functions work perfectly. All of them. Sounds amazing.
Fitted with an Audio Technica AT11 cartridge, wearing a brand-new elliptical 0.2 mil X 0.7 mil diamond stylus from LP Gear. Very musical, non-fatiguing and easy on the ears, pulls off difficult passages like sibilance, bells, bass drums, female vocals flawlessly. Love it.
Cartridge Type
Moving Magnet
Freq Response
20Hz - 22kHz
Tracking Force
1.5 - 2.5 g
Mass
5.5 g
Channel Separation
>30 dB
Channel Balance
>1.0 dB
Load Impedance
47k Ω
Output Impedance
1200 Ω
I could go on and on about this table, but I think I'll just let the photos speak for themselves! Any questions, just ask.
******Shipping is for the Contiguous United States ONLY. For shipping to Alaska, Hawaii, U.S. Territories, Canada, or the rest of the world, please contact me for a quote first!******
Massively upgraded, fully automatic, direct-drive, quartz-locked - keeps perfect speed. Just push a button to start - that's it!
This table was originally manufactured by Micro Seiki for H.H. Scott.
It took me five years of searching to find two of these in excellent condition. I wanted two to make it worthwhile to build all-new plinths (the other one I have is quilted maple - check it out!)
This plinth is 100% handmade with a new MDF base covered in hand-cut RAW mappa burl veneer - not paper backed. Mappa burl, from the European poplar trees - Populus nigra. Finished in a multi-stage process, including the lettering.
Completely new base, custom-made for this ultra-rare model. The original was actually in near-perfect condition - this was a phenomenal donor table to make into a custom job. The interior was dust-free and looked like new when I opened it up.
New dust cover custom fabricated.
No expense or time spared to make this table as perfect as possible. I dare you to find a prettier table.
Fully cleaned, lubricated and adjusted. Tonearm lift lubed with 300,000 weight silicone dampening fluid.
Original spring-loaded rubber feet replaced with a three-piece custom setup - half inch sorbotane discs sit upon a billet aluminum foot, which sits on sorbothane rings. Sorbothane is the most vibration absorbent material money can buy for a turntable.
Functions work perfectly. All of them. Sounds amazing.
Fitted with an Audio Technica AT11 cartridge, wearing a brand-new elliptical 0.2 mil X 0.7 mil diamond stylus from LP Gear. Very musical, non-fatiguing and easy on the ears, pulls off difficult passages like sibilance, bells, bass drums, female vocals flawlessly. Love it.
Cartridge Type
Moving Magnet
Freq Response
20Hz - 22kHz
Tracking Force
1.5 - 2.5 g
Mass
5.5 g
Channel Separation
>30 dB
Channel Balance
>1.0 dB
Load Impedance
47k Ω
Output Impedance
1200 Ω
I could go on and on about this table, but I think I'll just let the photos speak for themselves! Any questions, just ask.
******Shipping is for the Contiguous United States ONLY. For shipping to Alaska, Hawaii, U.S. Territories, Canada, or the rest of the world, please contact me for a quote first!******
This item is sold As-Described
This item is sold As-Described and cannot be returned unless it arrives in a condition different from how it was described or photographed. Items must be returned in original, as-shipped condition with all original packaging.Learn More.
| Listed | 4 years ago |
|---|---|
| Condition | Excellent (Used) Excellent items are almost entirely free from blemishes and other visual defects and have been played or used with the utmost care.Learn more |
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Year |
|
| Made In |
|
Product safety information may be available here.