TWEETER HIGH END DANISH MADE "INSECT EYE" DEEP DOME WIDECDISPERSION ULTRA FLAT RESPONSE EASY TO CROS

********************************************SEE MY OTHER LISTINGS!!!!!*******************************************
  Up for grabs is the BEST tweeter you can get for under 150 dollars period...

  I recently obtained a bunch of these famous make DANISH manufactured drivers, so some of you in the know, might know who actually made these....

 These are so good, that within 15 days, if you disagree with ANY of this, or don't like them I'll LITERALLY buy them back!
  Anyhow, these are made as if I myself were to design and manufacture tweeters..

  They are a 1" DEEEP dome type diaphragm, and that depth really helps with the dispersion of the driver..
 It's material looks to be some kind of treated silk, as it's super thin, super light weight and response, and you can see through the fabric..

   They look like a preying mantis eyeball in person..

 The reason for that is directly behind the diaphragm, and on the inside of the voice coil, there is a dampening ring, as well as a 3D appearance, because in the center of all of that, this thing has a rear chamber.

  The idea with that is that of course it absorbs the energy generated from the rear of the diaphragm instead of allowing it to bounce around internally, and reflect back into the dome out of phase and time, causing distortions and ghost notes...  This is HUGE in the way a tweeter sounds... Once you hear one of these, you'll see what I mean...
 
 The other idea is how low you can run these....  This design was engineered to run as low as possible, making 2 way systems even better, lessening how high the woofer has to accurately reproduce sound, and since most woofers become directional between 1,000 and 2,000hz, this is monumental for wide dispersion, even response....r....  You have a lower XO point with these..

  The actual free air resonance of these has been measured between 870 and 890 hz!  ----ya... no XXXX!  That rear chamber and absorbent ring dampener really works!!!!. Response above 1800 hz is almost perfectly flat clear out to OVER the 20KHz goal post...
  DCR is around 5 1/2 ohms, so I would say an 8 Ohm impedance
Power is 60 watts 
 SPL is > - 21KHz

Allow around 1 5/8-1 3/4" mounting depth.
Overall diameter is 4 3/8"

 The diaphragms are REPLACEABLE, so if you blow one, you can easily fix it VUIA those front mounting plate machine screws..

 Usable range, you can determine, but don't go below 900hz just to be safe. If you go that low on your XO point, use a steeper slope..

  BUT- in a 2 way, with an adequate woofer, with a simple capacitor, and @4Khz, you can get some AMAZING results... I mean TREMENDOUS sound...

  Run these with the following link, and it'll blow your mind for what you can do for a relatively low budget..
..

  I'm confident you'll absolutely LOVE these tweeters, that I am including my 15 day "NO GAMBLE" return option from delivery date (((less customer damage))) if for ANY REASON you simply don't like what you just bought...

   So, if you want to make your own 2/3/4 way KILLER systems, or to simply upgrade your current tweeter to improve what you already have, then here ya' go!