Custom Behringer System 55 - MUST SEE

If you are looking for the fattest synth sounds, this is the system for you.  Featuring 1 VCO, 6 oscillators, 5 VCAs, 4 EGs, a random signal generator, a filter bank, the famous Moog low pass ladder filter, a high pass filter, a sequencer, 3 mixers with 4 inputs and 4 outputs each, and much more.  This is a sound designer's subtractive synthesis dream come true. 

This is a one-of-a-kind, custom Eurorack case with not one, not two, but three rows of 140hp each for a total of a whopping 420hp of space.  The rows are split over two cabinets, an upper cabinet with a single row, and a lower cabinet with dual rows tilted back at a slight angle - just like the original System 55: a dual cabinet setup. Each cabinet is big enough to fit as many modules as the original System 55 cabinets and then some. 

Each cabinet has its own high-quality, discrete power supply, with enough juice to power all of the modules in their respective cabinet with room to spare.  Both cabinets feature a standard, grounded NEMA jack, each with its own power switch.  The bottom cabinet also has a NEMA extension port so that you can daisy chain the top cabinet to it.  When daisy chained, the top cabinet can power on even if the bottom cabinet is powered off.  A standard NEMA grounded  cable and a NEMA grounded cable extension is also included with this system.

Now, let's talk about the modules.  The top cabinet features the following modules:

• 1 x 914 Filter Bank
• 1 x 923 Filters
• 1 x 904A Voltage Controller Low Pass Filter
• 1 x 904B Voltage Controlled High Pass Filter
• 1 x 912 Control Voltages
  
• 5 x 902 Voltage Controlled Amplifier
• 4 x 911 Envelope Generator
• 1 x 911A Dual Trigger Delay

There is an open space for you to add one or two more modules and/or a blanking plate.

The bottom cabinet features the following modules:

• 2 x 921A Oscillator Driver
• 1 x 905 Attenuators
  
• 6 x 921B Oscilator
• 1 x 921 Voltage Controlled Oscillator
• 1 x 904 Multiples
• 1 x 960 Sequential Controller
• 1 x 962 Sequential Switch
• 3 x CP3A-O Oscillator Controller
• 3 x CP3A-M Mixer
• 1 x 903A Random Signal Generator
• 1 x CP35 Attenuators
• 1 x 961 Interface
  

Now, the original System 55 specifications call for two 905 modules but this one only has one.  There is an additional 992 module that I am including with this system (not pictured and not listed above).  Also, it should be noted that there is no MIDI interface because I have not been able to source the Behringer CM1A, which is intended to fit in the open spot in top cabinet. I have all of the original boxes for each and every module included with the system and will include them with this sale if you request them. The boxes will not be included unless you request them at the time of purchase.

Also, I am including well over 75 patch cables with this purchase so that you can start creating sounds right away.  The cables are of different lengths and colors.

Everything works as it should.  All modules are in mint condition with the exception of the CP35 Attenuators that has a couple of slight scratches at the bottom of the faceplate as evidenced by the photographs for the listing.