About This Listing

An unbeatable value in a cardioid large-diaphragm condenser, the AT2035 is your go-to mic for recording vocals, guitar amps, and more. Includes shockmount.

Try to Find a Better Cardioid Condenser at This Price!
With a modest price tag and the capability to reproduce stunning vocals -- from vital low notes to warm, inviting mid-tones to clean and clear high notes -- this mic is well-suited to record your latest hip-hop creation, indie rock sensation, or pop/folk ballad.

Considered by many audiophiles, professional sound engineers, and general microphone enthusiasts to be a souped-up version of the now-discontinued AT3035, the AT2035 incorporates its switchable 80 Hz high-pass filter and 10 dB pad with its large-diaphragm technology to easily handle high sound-pressure levels, lending a smooth, natural quality to your sound with no harsh edges.

Features:
- Cardioid pattern -- ideal for vocals
- High SPL handling and wide dynamic range provide unmatched versatility
- Switchable 80 Hz high-pass filter and 10 dB pad
- 120 ohm impedance
- 3-pin XLR output connector
- Custom shock mount and protective pouch included
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 20-20,000 Hz
- Low Freq. Roll Off: 80 Hz, 12 dB/octave
- Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
- Impedance: 120 ohms
- Max. Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.;
158 dB SPL, with 10 dB pad (nominal)
- Noise: 12 dB SPL
- Dynamic Range (typical): 136 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 82 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 3.8 mA typical
- Switches: Flat, roll-off; 10 dB pad (nominal)
- Weight: 403 g (14.2 oz)
- Dimensions: 170.0 mm (6.69 in.) long, 52.0 mm (2.05 in.) maximum body diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories Included: AT8458 shock mount for 5/8 in. - 27 threaded stands; 5/8 in. - 27 to 3/8 in. - 16 threaded adapter; soft protective pouch. Mic Stand not included.
- Audio-Technica Case Style: R5

Weight, Dimensions, and Manufacturer Part Numbers
Warehouse Resealed
Shipping Weight: 2 lbs
Shipping Dimensions: 10 x 10 x 3 in
Manufacturer Part Number (MPN): AT2035

zZounds is an authorized dealer of Audio-Technica products.

Condition
Brand
Model
  • AT2035 Large Diaphragm Cardioid Condenser Microphone
Categories
Microphone Type
  • Large-Diaphragm Condenser
Wired/Wireless
  • Wired
Polar Pattern
  • Cardioid
Electronics
  • Solid State

About the Seller

zZounds

Oakland, NJ, United States
(42,656)
Joined Reverb:2016
Items Sold:79,823
Product Overview
Looking for an entry level large diaphragm condenser mic? Look no further than the Audio-Technica AT2035, an excellent cardioid condenser mic at an even more excellent price. Use it in your home studio or in professional settings; either way, its ability to reproduce details with extreme clarity and its low self-noise make it a winner, particularly for the price. A switchable 80 Hz high-pass filter and -10dB pad give you the option for onboard versatility, allowing you to record vocals or loud instruments at close distances without getting a muddy, boomy quality.
Shop 53 options from $63
Product Reviews
Audio-Technica AT2035 Studio Microphone
Audio-Technica AT2035 Studio Microphone
$149

About This Listing

An unbeatable value in a cardioid large-diaphragm condenser, the AT2035 is your go-to mic for recording vocals, guitar amps, and more. Includes shockmount.

Try to Find a Better Cardioid Condenser at This Price!
With a modest price tag and the capability to reproduce stunning vocals -- from vital low notes to warm, inviting mid-tones to clean and clear high notes -- this mic is well-suited to record your latest hip-hop creation, indie rock sensation, or pop/folk ballad.

Considered by many audiophiles, professional sound engineers, and general microphone enthusiasts to be a souped-up version of the now-discontinued AT3035, the AT2035 incorporates its switchable 80 Hz high-pass filter and 10 dB pad with its large-diaphragm technology to easily handle high sound-pressure levels, lending a smooth, natural quality to your sound with no harsh edges.

Features:
- Cardioid pattern -- ideal for vocals
- High SPL handling and wide dynamic range provide unmatched versatility
- Switchable 80 Hz high-pass filter and 10 dB pad
- 120 ohm impedance
- 3-pin XLR output connector
- Custom shock mount and protective pouch included
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 20-20,000 Hz
- Low Freq. Roll Off: 80 Hz, 12 dB/octave
- Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
- Impedance: 120 ohms
- Max. Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.;
158 dB SPL, with 10 dB pad (nominal)
- Noise: 12 dB SPL
- Dynamic Range (typical): 136 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 82 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 3.8 mA typical
- Switches: Flat, roll-off; 10 dB pad (nominal)
- Weight: 403 g (14.2 oz)
- Dimensions: 170.0 mm (6.69 in.) long, 52.0 mm (2.05 in.) maximum body diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories Included: AT8458 shock mount for 5/8 in. - 27 threaded stands; 5/8 in. - 27 to 3/8 in. - 16 threaded adapter; soft protective pouch. Mic Stand not included.
- Audio-Technica Case Style: R5

Weight, Dimensions, and Manufacturer Part Numbers
Warehouse Resealed
Shipping Weight: 2 lbs
Shipping Dimensions: 10 x 10 x 3 in
Manufacturer Part Number (MPN): AT2035

zZounds is an authorized dealer of Audio-Technica products.

Condition
Brand
Model
  • AT2035 Large Diaphragm Cardioid Condenser Microphone
Categories
Microphone Type
  • Large-Diaphragm Condenser
Wired/Wireless
  • Wired
Polar Pattern
  • Cardioid
Electronics
  • Solid State

About the Seller

zZounds

Oakland, NJ, United States
(42,656)
Joined Reverb:2016
Items Sold:79,823
Product Overview
Looking for an entry level large diaphragm condenser mic? Look no further than the Audio-Technica AT2035, an excellent cardioid condenser mic at an even more excellent price. Use it in your home studio or in professional settings; either way, its ability to reproduce details with extreme clarity and its low self-noise make it a winner, particularly for the price. A switchable 80 Hz high-pass filter and -10dB pad give you the option for onboard versatility, allowing you to record vocals or loud instruments at close distances without getting a muddy, boomy quality.
Shop 53 options from $63
Product Reviews

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

Oops, looks like you forgot something. Please check the fields highlighted in red.