Alesis MMT-8 V1.11 OS Upgrade ROM - No soldering required! Easy upgrade for MMT8

Brand New
$29.99
$21.99
27% price drop
+ $4.99 Shipping
$2.99 shipping when combined
1
10+ in stock
This seller is open to offers
Shipped From
Night Crew Digital Synth Repair Shop
Cambridge, MA, United States
1,279
Sales
1000+
Joined Reverb
2017
Preferred Seller
Quick Shipper
Reverb Protection

Buy with Confidence – Reverb Protection has you covered

  • Live support from an expert team of musicians
  • Simple and straightforward returns
  • A safe community for finding the gear you want

About This Listing

The only EPROM store promising to ONLY use brand new, newly manufactured chips! Don't pay for 30, 40 year old re-programmed chips that will suffer from BIT ROT when you could get brand new ones. Yes I have the best prices and my chips are actually Brand New. I am also the only seller offering a 1 year free replacement on all my chips because I am that confident in them. 

NO SOLDERING OR SPECIAL SKILLS NEEDED.... JUST A NORMAL SCREWDRIVER AND 5 MINUTES! See the last three pictures for installation instructions.

I have some brand new replacement system chips for the Alesis MMT-8 bringing you to the very last OS ever released, Version 1.11 released in 1990. This is what you need if you are a MMT-8 user since this addresses all known bugs and timing issues (and there are many in older versions).

Over two dozen sold.... buy with confidence

-------------------------------------------------
Alesis MMT-8 Software Version History

The table below describes the fixes made in each version of the ROM. Dates are in US format, month/day/year.

(Many thanks to Cedrik Felter for the information)

Date Version Comments
11/1/87 1.02
First production release
12/1/87 1.03
Fixes tape sync output so that when a part or song loops, a clock output pulse isn't skipped.
Outputs MIDI controller 64 (sustain pedal) at value 0 (off) once for each MIDI channel whenever a part or song is stopped so as to stop synths from sustaining.
Changed MIDI test routine so that an extra byte is sent out before testing MIDI to accommodate 8051s that have indeterminate data in the UART on power up.
THIS VERSION WAS NEVER RELEASED PUBLICLY.
12/8/87 1.04
Fixes STEP EDIT bug that caused erroneous data to be displayed if an event other than the first or last event on a beat is moved to another beat.
Also in STEP EDIT, editing the sub-beats now do not allow decrementing below beat 001/00.
12/16/87 1.05
Fixes cassette output bug that would occasionally cause a part to output data much longer than it should, which would make the cassette interface data unusable.
12/30/87 1.06
Fixes cassette input bug that would cause data to be corrupted if only part 99 is loaded in from tape.
1/4/88 1.07
Fixes cassette input bug that would cause part 99 to be erased if a single part or song was loaded in, or a cassette was verified.
5/26/88 1.08
When in record on a part in loop, the display will no longer remain displaying “RECORDING” after looping. The display will still not change when punching in or out (to reduce delays).
Fixes bug that would cause an incorrect display if aborting “LOAD ONE PART” before tape data has begun when previously in song mode, and aborting “LOAD ONE SONG” before tape data has begun when previously in part mode.
Fixes bug that caused the display in part edit mode to show the incorrect beat number for beats 456 through 511. This bug was also present in insert note (COPY button) while in edit part mode.
Fixes bug that would cause the display to lock up flashing between “CHANGE LENGTH” & “MEMORY FULL” if an attempt was made to change the length of a part when memory was full.
Fixes bug that would cause the end point of a track or part to be erased if part of a track or part (i.e., only notes, controllers, MIDI channel 1, etc) was erased. This would not cause a problem while playing a part, but would result in the part following this one in a song not to play.
Fixes bug that would cause any notes with duration's of 2/64 or any multiple thereof to be increased by 2/64. This would occur when changing length, quantizing, or copying any part or track.
Increased delay loops in display routines so that fewer LCD displays would be rejected in production.
3/8/89 1.09
If a song was stopped and continued within the first part of the song, the MIDI output of the sequence would not always be in sync with the click, MIDI clock, and display. This is now fixed.
If a track of a song was shifted by 2 or more 384th notes, and one or more of the parts of the song was 1 beat in length, the first occurrence of a 1 beat part would be played twice, causing that track to b delayed by 1 beat. This is now fixed.
Fixes bug in which if two events such as controller, program change, or aftertouch, occurred on the same beat, and any edit operation was performed (such as ERASE, QUANTIZE, LENGTH, etc.), then stepping backwards through this event in step edit mode would cause non-existing events to show up in the display, which could cause the machine to lock up.
Fixes bug which system exclusive data would be played back incorrectly if the track with the data was set to any MIDI channel other than UNCHANGED.
Fixes bug in which events could be inserted into an empty track in step edit mode repeatedly, until the events being inserted occurred before beat 1.
Fixes bug that would cause a song to continue from the wrong part if a step was selected in edit mode and then STOP/CONTINUE was pressed.
When changing the name of parts or songs, the characters will no longer loop from the last character (¬) to the first character (space) and vice versa.
Added feature that allows locating directly to any specific beat of a part. This accessed by holding either the fast forward of the rewind button, and entering a beat number with the keypad. If in stop, pressing STOP/CONTINUE will continue the part from the selected beat. If in play, the part will continue from the selected beat when fast forward or rewind is released. In SONG mode, this feature can be used to locate directly to any beat within the current step of the song.
Fixes bug that caused a track to stop playing if the track was shifted forward in time (+1 to +48 384th notes), and the song was stopped during the last beat of a step, and the track had already played the first beat of the next step. If continue was pressed from this point, the shifted track would no longer play. This is now fixed.
7/22/89 1.10
If in song mode with the first step of a song being a one beat part, and rewind is held until the display reads step 00 beat 000, and then stop/continue was pressed while holding rewind, the first step would be played twice, and offset tracks may be out of sync. Stop/continue is now ignored while holding the rewind button.
The start/stop footswitch jack is now scanned at power on to determine the polarity of the switch that is plugged in (normally open or normally closed). For this to function properly, the footswitch should be plugged in before turning power on, and it should not be pressed when turning the power on. If no footswitch is plugged in at power on, the MMT-8 will assume a normally open footswitch.
If the start time of an unquantized note added to its duration results in the exact beat that the note would be quantized to, performing a quantize note start would result in a duration of 00/000 (e.g., note start of 001/47 duration 000/01 when quantized would become 001/48 with a duration of 000/00), which is invalid, and could result in a fatal crash if other notes existing on the same beat are edited. This is now fixed.
If a note event and a sysex event exist on the same beat, rewinding past the events in step edit mode would cause the display to skip the sysex event, and only show the note. If more than one note existed as well, the note preceding the sysex event would also be skipped. This is now fixed.
In step edit mode, erasing a sysex event could cause a track to have erroneous data, which could lead to a crash. This is now fixed.
In step edit mode, changing the start time of a sysex event forward would cause a lock up and often complete memory dump. This is now fixed.
10/31/90 1.11
If an empty part is selected, edit mode should not able to be entered. However, if an empty part is played, it is possible to enter edit mode, stop playing, and then insert events which will corrupt data. Now, Edit mode cannot be selected when playing an empty part.
If an empty part is recorded for 683 beats (either by recording through the entire part, or rewinding with loop on to a beat before 683 and punching in) without having set the length first, the length of the part will not be set properly, causing eroneous data in the Edit mode as well as other problems. This is now fixed.
If a part's length is changed from the top, any notes whose duration was a multiple of 256 clocks (2beats/64sub-beats, 5/32, 8/00, etc.) will have its duration altered such that the duration becomes 256 clocks (2/64) greater than it was previously. This is now fixed.

Product Specs

ConditionBrand New (New)
Brand New items are sold by an authorized dealer or original builder and include all original packaging.learn more
Brand
Model

Reviews of this Shop

1,279
;

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

iOS app store button
Android play store button
The Apple logo and the App Store are trademarks of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC.
Scan with your phone to get the Reverb app:
App Install QR Code
Oops, looks like you forgot something. Please check the fields highlighted in red.