2012 Les Paul Standard Plus Light Burst This guitar has never been gigged out and has spent most of it's time in the case stored in my smoke free music room.
Guitar Specs:
•Body ◦Top: AAA Maple ◦Back: Mahogany ◦Binding: Cream ◦Body Type: Modern Weight Relief ◦Adhesive: Franklin Titebond 50 •Neck ◦Species: Mahogany ◦Profile: Asymmetrical '60s SlimTaper ◦Truss Rod: Traditional Adjustable ◦Joint Angle: 5 degrees (+/- 15 seconds) ◦Adhesive: Franklin Titebond 50 •Neck Fit ◦Joint: Mortise and Tenon ◦Adhesive: Franklin Titebond 50 ◦Joint Angle Tolerance: +/- .005 inch •Fingerboard ◦Species: Rosewood ◦Frets: 22 ◦Radius: 10 – 16 inch Compound Radius ◦Scale Length: 24.75 inches ◦Nut/E.O.B: 1.695/2.260 inches ◦Binding: Cream ◦Inlays: Figured Acrylic Trapezoid •Nut ◦Material: Corian ◦Width: 1.695 ◦Slots: Gibson PLEK System •Headstock ◦Logo: Mother of Pearl ‘Gibson’ Logo with Gold Scripted ‘Les Paul Model’ Silkscreen ◦Truss Rod Cover: Black and White Antique Bell with ‘Standard’ Engraved •Tuners ◦Model: Grover Locking Kidney ◦Tuning Ratio: 18:1 ◦Plating: Chrome •Bridge ◦Type: TonePros Tune-o-matic ◦Plating: Chrome •Tailpiece ◦Type: TonePros Stop Bar ◦Plating: Chrome •Hardware ◦Knobs: Amber Top Hat ◦Pickguard: Cream, Included Inside Case ◦Toggle Switch Washer: Cream with Gold Imprint ◦Pickup Mounting Rings: Cream Plastic ◦Control Plate Cover: Black Plastic ◦Strap Buttons: Aluminum •Pickups ◦Neck: Coil-tapped BurstBucker Rhythm Pro (Alnico V) ◦Bridge: Coil-tapped BurstBucker Lead Pro (Alnico V) •Electronics ◦Potentiometers: ■2 Push/Pull Volume Controls ■2 Push/Pull Tone Controls ◦Type: 500k Linear Volume, 500k Non-linear Tone ◦Coil Wiring: Machine Wound ◦Toggle Switch: Three-way Switchcraft with Cream Plastic Tip ◦Output Jack: Traditional 1/4 inch •Finish ◦Sealer: Nitrocellulose ◦Surface Texture: High Gloss ◦Process: 1-1.5 mils. Guitar weighs 8-1/2 pounds.
•Case Type: Gibson Hardshell