Sustainiac Stealth Pro Kit

Choose driver type
• 6-string
• 7-string (available in black color only)

Choose driver size:
• Humbucker size (all are configured for standard trim-ring mounting)
• Single-coil size
  Mounting type for SC driver only
  • Threaded for pickguard mounting (Strat, Jem, etc.)
  • Unthreaded for woodscrew mounting into pickup cavity

Choose driver color:
• Black
• White (not available for 7-string)

ELECTRONIC CIRCUIT:

• The circuit board measures 3.75 x 1.1 in, 1/2 in. thick (95mm x 28mm x 12.5mm). It takes the bridge pickup signal, amplifies/processes it, and sends the amplified/processed signal to the Sustainiac driver.
• When the Sustainiac is OFF, the Sustainiac driver is used as an active pickup. The sustainer circuit now amplifies the tiny driver pickup signal to a useable level. Pickup equalization is is done on the circuit board. Two wires are provided to allow switching between single-coil (SC) and humbucker (HB) sound.
• We now supply two board equalizations: (1) Clear wrapper for guitars with humbucker bridge pickup; (2) white wrapper for guitars with single-coil bridge pickup (standard Strats).

CONTROLS : (ON/OFF and HARMONIC MODE)

Choose one ON/OFF control type:
• Push-pull (standard control for our kit) ON/OFF control uses only the switch portion of the control. Therefore, the original pot function (volume/tone etc.) will still retain its original function.
• Toggle switch (optional, no extra cost)

Choose one HARMONIC MODE control type:

• Push-pull (standard control for our kit) ON/OFF control uses BOTH the switch portion of the control. Therefore, the original pot function (volume/tone etc.) will LOSE its original function.
• Toggle switch (optional, no extra cost)