Status Carbon fiber Precision Bass Neck

Purchased brand new from status in 2019. Has been on two different basses but seen minimal play time, fret wear is negligible. No modifications were made to the tuner bushing size and should fit standard tuners. Back of headstock has holes drilled for the two different style tuners I used, if you use light weight “y” key style tuners with only one mounting hole the other holes for the conventional style tuners will be visible. Original high gloss lacquer finished was sanded down to a matte/satin. Not perfect but I think it looks very good and feels even better. Has holes drilled for conventional fender mounting screws as well as the style with contoured neck heal. Neck is straight and truss rod works as it should. I did not countersink the holes when I drilled them so there is slight chipping of the clear coat in some spots. Some additional signs of use and and small chips are present of the back of headstock. Information including installation instructions can be found on the Status Graphite website. On both basses I had this on a neck shim was needed to get the angle/string height correct, this may have been specific to my applications but I feel like it’s useful information to have for when you mount it.