Endorphin.Es Cockpit Black 1U Module [Three Wave Music]

COMPACT, PERFORMANCE ORIENTED 4 CHANNEL STEREO MIXER WITH SIDECHAIN DUCKING

• 4 channel stereo performance mixer

• Daltonic friendly - the LEDs are blue/red instead of red/green

• Channel 1 features a stereo input jack, Channels 2/3/4 are dual mono

• On-board compressor with external sidechain control voltage option (3 modes) to add dynamics to your mix.

• Stereo output for speakers or headphones with enough current to drive a wide range of headphones

• extra aux, stereo out, balanced output pins, compatible with Intellijel Audio Jacks V2 Boards / cases

• available in 3U / 6HP version

Power consumption:

• 40 mA +12V

• 25 mA -12V

• 0 mA 5V

  Dimensions:

• 24 HP (1U)

• 42 mm deep (fits all Intellijel Palette cases etc).

FAQ:

I cannot switch the algorithm of the Sidechain Compressor. Make sure the encoder buttons work properly i.e they mute/unmute each channel. Also make sure you press all 4 encoders at once. Holding for 1 second while they being pressed will switch the mode in which the Cockpit is indicated by blinking of the blue LED. The mode is stored in a few seconds and will load on the next module's power up.

Rainbow cable pinout. Side red/brown pair of pins always correspond to -12V similar as with typical gray ribbon cable.

What cables are supplied with Cockpit 1U module. 10-10 ribbon power cable, 6-6 ribbon cable for balanced output into Intellijel Audio Jacks V2 board. Note: you have to get dupont daily chain (a.k.a. mixup) wires on your own.