Oasis Case Humidifier

Oasis Case Humidifier OH6 FREEShipping with the purchase of a guitar from 2BISHOPS!!! The Oasis?? humidifier attaches to the inside of yourinstrument case. It gives you the same reliability and ease of use as ouroriginal humidifier, outperforming other case and instrument humidifiers bydoing the following:Making it easy to see when its time to refill. Providing long-lasting humidification. Ensuring no leakage due to overfilling. Promising two levels of leak protection. How does it work? A neodymium magnet* in the humidifierenables you securely attach it inside your case, while still being able toeasily remove and re-attach it to either a steel belt-style clip or a stainlesssteel strip with adhesive backing (both are provided with the humidifier). Thebelt-style clip fits over the side of your case, providing a flat verticalsurface to which the magnet can adhere. The adhesive-backed stainless steelstrip allows for either vertical or horizontal attachment anywhere there is aflat surface inside the case.** This type of humidifier provides theflexibility to position the humidifier in a wide variety of locations withinyour instrument case.A 10cc. syringe comes with the humidifier increasing yourcontrol while filling and refilling. Since the Oasis?? Case Humidifier holdsabout 32ccs of water, it will take 3+ syringes of water to fill the firsttime. After that, refills should only take 1+ syringe of water. Because tap andbottled water contain dissolved minerals that can clog the liner, distilledwater is recommended to extend the useful life of your humidifier. *Even at the comparatively low strength we use, neodymiummagnets are extremely powerful. During the manufacturing process, weve seen anindividual magnet, located 8-10" from a stack of magnets, fly across thetable because its so powerfully attracted to the other magnets. At times, itdoes so with such force that the magnet breaks. Therefore the best way to control the force of the magnet isto make contact with the metal clip or plate by sliding the humidifier on oroff along the direction of the clip or plate. In more visual terms, this issimilar to the difference between landing an airplane versus a helicopter. Thehumidifier should be attached or removed by sliding it into position from oneend or the other (the same way an airplane would land or take off) and not witha direct drop in (the way a helicopter takes off or lands). This approach hastwo advantages. First, it dramatically reduces any risk of breaking a magnet.Secondly, it reduces stress on the seam of the humidifier (where the magnet is located)extending the useful life of the humidifier. ** In our testing, we found that the stainless steel stripcan be removed from the case without the adhesive backing leaving a stickyresidue or damaging the case. We cannot guarantee that this will be thesituation with every case, but its worked on the cases weve tested.*** YouTube video is not the OH 6, but reflects the need for a humidifier for your string instrument.