KLH Model Five Floorstanding Speaker, English Walnut

The Model Five acoustic suspension speaker is known as one of the finest and most sought-after speakers for audiophiles, both new and seasoned. Our updated version of this classic speaker has real wood veneers, cast aluminum baskets, and uses acoustic suspension design principles made famous by founder Henry Kloss. Includes: KLH Model Five 3-Way 10 Acoustic Suspension Floorstanding Loudspeaker (English Walnut) - 5 Degree Slant Riser Base - Manual - KLH 10 Year Limited Warranty Features: Iconic Mid-Century Modern Styling Acoustic Suspension Design - The most accurate and linear enclosure design available today Three-Position Acoustic Balance Control to tailor the loudspeaker's output for the most difficult acoustic environments Dedicated midrange driver to reproduce the critical mid-frequency band Non-Resonant Die-Cast Aluminum Midrange & Woofer Frames Die-Cast Aluminum Tweeter Faceplate KLH cabinetry featuring a structurally reinforced 3/4 MDF enclosure Thirteen component network using high-quality iron-core inductors & Mylar capacitors Each speaker includes its own 5 Degree slant riser base made of powder coated 14-gauge steel Low-profile magnet attached grille Specifications: Finish: English Walnut Frequency Response: 42Hz - 20,000Hz +/- 3dB Low Frequency Extension: -10dB @ 32Hz In-Room Sensitivity: 90.5dB @2.83V / 1M Free-field Sensitivity: 87.5dB @ 2.83V / 1M Power Handling: 200 Watts / 800 Watts Peak Recommended Amplification: 20 Watts to 200 Watts In-Room Maximum SPL: 112.3dB Impedance: 6 Ohms (3.5 ohm minimum @140 Hz) Horizontal Dispersion: 140 Degree Degrees Features: Three-Position Acoustic Balance Control Crossover Frequency: MF: 380Hz (2nd Order Electro-Acoustic)
HF: 2,850Hz (2nd Order Electro-Acoustic) High Frequency Driver: 1 Aluminum Dome with Soft Rubber Suspension Mid Frequency Driver: 4 Pulp-Paper Cone with Reverse
Roll Rubber Suspension Low Frequency Driver: 10 Pulp-Paper Cone with Reverse
Roll Rubber Suspension, 2 Diameter
Flat-Wire Voice Coil Enclosure Material: Structurally Reinforced 3/4 Medium
Density Fiberboard Inputs: Five-Way Gold-Plated Binding Posts Dimensions (H x W x D): 34.25 x 13.75 x 13 (87 x 35 x 33cm) (With Included Riser Base)
26 x 13.75 x 11.5 (66 x 35 x 29.2cm) (Without Riser Base) Weight: 52 lbs (23.6kg) (With Included Riser Base) 44 Ibs (20.0kg) (Without Riser Base)