Pair of EAW KF300Z 3-Way Full Range Loudspeakers - 2 PIECES - KF300

USED PAIR OF EAW KF300Z 3-WAY FULL RANGE SPEAKER CABINETS
Recently obtained from a large pro audio rental / rehearsal facility that was liquidating excess equipment.
Speakers are in used but OK condition. Some chips in the wood, nicks and scuffs here and there from normal use.
Can be painted in chipped spots if you so desire.
See photos for a good idea of the overall condition.
Tested and working, no issues.
Speakers will ship by truck freight. Price to be determined. Feel free to message with your address for a quote. Price should be in the $400 range for the pair.
Local pickup in the southern area of Brooklyn, NY is certainly encouraged.
We can deliver within a 100 mile radius of Brooklyn, NY for a flat fee of $200.
Listing is for (2) EAW KF300Z speakers only, as pictured. No other accessories included.
GRAB 'EM WHILE THEY LAST!
Some specs and features:
A 3-way full range loudspeaker in a vented trapezoidal enclosure. Includes a 12-in woofer, a horn-loaded 7-in midrange cone with Radial Phase Plug™, and a 1.4-in exit compression driver on a 90° x 45° constant directivity horn. The internal crossover is user-switchable for either passive or bi-amp operation (with a passive LF/MF crossover). The enclosure has six fly points, three each top and bottom, plus an integral pole mount cup. Handles are located for the best balance when carrying.
The KF300z is one of the smallest, full-range, 3-way loudspeakers available. It is particularly suited for portable or installed applications, including band PA, club systems, corporate AV, and theatrical productions. The midrange section incorporates a 7-in radial phase plug based on EAW’s patented 10-in Radial Phase Plug™ used in other KF Series products. This design produces a time-coherent midrange wavefront that is critical to ensuring good vocal articulation. The appearance of the KF300z is enhanced with a curved grille that matches other KF300 as well as companion KF600 Series products.
Architect & Engineering Specs
The 3-way full-range loudspeaker shall incorporate a vented 12-in LF transducer, a 7-in horn-loaded cone MF transducer with Radial Phase Plug™, and a 1.4-in exit / 2.5-in diagphragm HF compression driver on a constant directivity horn. The MF/HF horn shall have a nominal beamwidth of 90° (h) x 45° (v). System frequency response shall vary no more than ±3 dB from 100 Hz to 20 kHz measured on axis. In passive mode, the loudspeaker shall produce a sound pressure level (SPL) of 92 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of producing a peak output of 127 dB SPL on axis at 1 meter. It shall handle 750 watts of amplifier power (AES Standard) and shall have a nominal impedance of 4 ohms. In bi-amped mode, the LF/MF section shall produce a sound pressure level (SPL) of 92 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of producing a peak output of 127 dB SPL on axis at 1 meter. It shall handle 750 watts of amplifier power (AES Standard) and shall have a nominal impedance of 4 ohms. In addition, the HF section in bi-amped mode shall produce a sound pressure level (SPL) of 101 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of producing a peak output of 130 dB SPL on axis at 1 meter. It shall handle 200 watts of amplifier power (AES Standard) and shall have a nominal impedance of 8 ohms. The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of exterior grade Baltic birch plywood and shall employ extensive internal bracing. It shall be finished in wear resistant textured black paint. Input connectors shall be 2x Neutrik NL4 Speakon. The system shall include a switch allowing it to be operated in passive or bi-amp powering mode. A total of six 3-position flytracks with integral 3/8"-16 threaded mounting/suspension points (3 each top and bottom) shall be provided. The front of the loudspeaker shall be covered with a powder coated perforated steel grille backed with open cell foam to protect against dust.

At New York Music Mall LLC , we strive to make sure our customers are totally satisfied with their buying experience. If for any reason you have any issue with your purchase, please contact us and we will get right back to you and work with you to resolve any problems.

Please do not open any cases or claims without contacting us first. We will be able to resolve any problems directly and make sure that any issues are taken care of immediately.

Our perfect feedback speaks for itself.

THANK YOU FOR YOUR BUSINESS. WE APPRECIATE IT!