Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn More
About This Listing
VIRTUAL ACCESS PROGRAMMER FOR OBERHEIM MATRIX-1000/ 6 / 6R
This
software is a Virtual ACCESS synthesizer programmer for use with the
Oberheim Matrix-1000 / 6 / 6R synthesizer. It emulates the ACCESS
hardware editor in a software environment within the APPLE LOGIC
audio/sequencer program (formerly Emagic Logic). To use this
software you MUST have a valid copy of LOGIC on your computer (see
below) as well as a MIDI interface which connects your computer via MIDI
cable to your hardware synthesizer.
This software CANNOT be used as a stand alone application under any
circumstances. It will NOT run in Ableton, Reason, VST or any other
host - it is not a plug-in but a single importable layer of the Logic
environment.
Upon
purchase, you will ultimately receive a ZIP archive of the editor you
purchased for Logic. UNZIP this archive and you will have a LOGIC
song document you can now open in the Logic program (Mac v8-9 and vX
are supplied - please request special version if needed). Once
open, you will see the editor on your screen and you can then discover
the pleasures of a Virtual ACCESS programmer for your OBERHEIM synthesizer!
NOW LOGIC X COMPATIBLE!
Logic X upgrades have been ported to earlier versions. Previous
buyers may contact me here for free upgrade to any version v4 - 9.
UPDATE: November 9, 2015 - THIS VERSION IS NOW 100% LOGIC X COMPATIBLE!
CAUTION!!
The original Matrix-1000 v1.1 firmware (the software inside your unit
that runs the synth) has a few bugs that are pretty serious and these
affect the programming of the synth from any remote SYSEX editor such as
this or the original ACCESS hardware programmer. A kind fellow in
Germany has fixed the worst of these bugs and released a public v1.1.3
firmware which I INCLUDE with your purchase of this editor (software
.bin file ONLY). You will have to burn this .bin file to a 27C256
EPROM and physically install it inside your unit for 100% functionality
(or live without a few key parameters). Overall, a fairly simple
process and highly recommended to get the most out of this editor and to
avoid the nasty bugs.
Upgrade also necessary for full functionality of MATRIX-6 - firmware v2.13 required for full operation (and included as above).
OVERVIEW:
This
editor is physically laid out to emulate the ACCESS Matrix hardware
programmer (circa 1995). If you're familiar with the ACCESS hardware
programmer then you should feel right at home here. I've adopted
certain changes for the better such as adding all the additional
Matrix-1000 voice parameters that the ACCESS lacks, including a RESET
function as well as a few other performance tools.
Important
things for voice programming such as the Modulation Matrix, Key Click,
Key Mode, Portamento, and all the rest have been included here.
Every other voice parameter that the Matrix can respond to - is present
on a second programmer page. Page 1 will lay out similar to the
ACCESS programmer and Page 2 acts as an adjunct to that (please see the
included photos to understand the layout).
Due to the deep and
complex nature of the Matrix synthesizer - coupled with certain
limitations in the LOGIC environment - some programming functions will
have certain minor constraints (only in the Mod Matrix). This cannot
be avoided here - but this programmer does add a ton of functionality
that the original ACCESS lacks and you can still tweak the SYSEX objects
yourself if you desire an option I have not made available.
All
real time moves are recordable by the Logic sequencer for repeatable
real time changes on playback. Or as an option you can automate
these parameters with LOGIC'S hyperdraw function. You may also
remotely control these SYSEX faders and buttons via a hardware control
surface if you take the time to tailor the controls to suit your
individual hardware. This is not difficult to do and needs only be
done once and then saved for future sessions.
This programmer
resides in one layer of the LOGIC environment hierarchy - and is
importable to your personal AUTOLOAD song (notes on how to do so are
also included). It is not a plug-in, but a page in the environment
which can be imported into your song documents or run alongside your
current work simultaneously as a second song.
Detailed documents are included with your purchase and cover all aspects of usage - both remedial and advanced.
SYSTEM REQUIREMENTS:
This editor is current but is still compatible with many earlier
versions of Logic starting with Emagic MAC Version 4.x. It is
compatible with ALL versions of Logic through vX. (Logic X v10.5 has a visual bug concerning button display - corrected in v10.6)
It is also
compatible with Logic Express v7 - 9. If you have a version 8 Logic
you must use v 8.01 or higher which fixes a SYSEX bug that renders v8.0
inoperable.
This editor is also compatible with the v4 - v6 PC
versions of Logic (please specify upon purchase). In all v5's - it
is compatible down to Logic SILVER. NOT compatible with Micro-Logic
or any of the other earlier neutered Emagic bundled versions.
This editor is designed to fit a screen resolution of 1024 X 768 or larger but will also work on smaller screens.
TERMS and CONDITIONS:
Free
Delivery is included with purchase. Delivery is by EMAIL ATTACHMENT
ONLY - and will be delivered ASAP after payment has cleared.
I accept all REVERB payment methods. Because this is a software only item, there are
no returns allowed. Please contact me at or via the
Reverb.com messaging system if you have any questions before the
purchase.
I also offer a customizing service for your software to
help integrate it more deeply into your personal set-up should you
require advanced help. Please contact me here for more info.
VIRTUAL ACCESS PROGRAMMER FOR OBERHEIM MATRIX-1000/ 6 / 6R
This
software is a Virtual ACCESS synthesizer programmer for use with the
Oberheim Matrix-1000 / 6 / 6R synthesizer. It emulates the ACCESS
hardware editor in a software environment within the APPLE LOGIC
audio/sequencer program (formerly Emagic Logic). To use this
software you MUST have a valid copy of LOGIC on your computer (see
below) as well as a MIDI interface which connects your computer via MIDI
cable to your hardware synthesizer.
This software CANNOT be used as a stand alone application under any
circumstances. It will NOT run in Ableton, Reason, VST or any other
host - it is not a plug-in but a single importable layer of the Logic
environment.
Upon
purchase, you will ultimately receive a ZIP archive of the editor you
purchased for Logic. UNZIP this archive and you will have a LOGIC
song document you can now open in the Logic program (Mac v8-9 and vX
are supplied - please request special version if needed). Once
open, you will see the editor on your screen and you can then discover
the pleasures of a Virtual ACCESS programmer for your OBERHEIM synthesizer!
NOW LOGIC X COMPATIBLE!
Logic X upgrades have been ported to earlier versions. Previous
buyers may contact me here for free upgrade to any version v4 - 9.
UPDATE: November 9, 2015 - THIS VERSION IS NOW 100% LOGIC X COMPATIBLE!
CAUTION!!
The original Matrix-1000 v1.1 firmware (the software inside your unit
that runs the synth) has a few bugs that are pretty serious and these
affect the programming of the synth from any remote SYSEX editor such as
this or the original ACCESS hardware programmer. A kind fellow in
Germany has fixed the worst of these bugs and released a public v1.1.3
firmware which I INCLUDE with your purchase of this editor (software
.bin file ONLY). You will have to burn this .bin file to a 27C256
EPROM and physically install it inside your unit for 100% functionality
(or live without a few key parameters). Overall, a fairly simple
process and highly recommended to get the most out of this editor and to
avoid the nasty bugs.
Upgrade also necessary for full functionality of MATRIX-6 - firmware v2.13 required for full operation (and included as above).
OVERVIEW:
This
editor is physically laid out to emulate the ACCESS Matrix hardware
programmer (circa 1995). If you're familiar with the ACCESS hardware
programmer then you should feel right at home here. I've adopted
certain changes for the better such as adding all the additional
Matrix-1000 voice parameters that the ACCESS lacks, including a RESET
function as well as a few other performance tools.
Important
things for voice programming such as the Modulation Matrix, Key Click,
Key Mode, Portamento, and all the rest have been included here.
Every other voice parameter that the Matrix can respond to - is present
on a second programmer page. Page 1 will lay out similar to the
ACCESS programmer and Page 2 acts as an adjunct to that (please see the
included photos to understand the layout).
Due to the deep and
complex nature of the Matrix synthesizer - coupled with certain
limitations in the LOGIC environment - some programming functions will
have certain minor constraints (only in the Mod Matrix). This cannot
be avoided here - but this programmer does add a ton of functionality
that the original ACCESS lacks and you can still tweak the SYSEX objects
yourself if you desire an option I have not made available.
All
real time moves are recordable by the Logic sequencer for repeatable
real time changes on playback. Or as an option you can automate
these parameters with LOGIC'S hyperdraw function. You may also
remotely control these SYSEX faders and buttons via a hardware control
surface if you take the time to tailor the controls to suit your
individual hardware. This is not difficult to do and needs only be
done once and then saved for future sessions.
This programmer
resides in one layer of the LOGIC environment hierarchy - and is
importable to your personal AUTOLOAD song (notes on how to do so are
also included). It is not a plug-in, but a page in the environment
which can be imported into your song documents or run alongside your
current work simultaneously as a second song.
Detailed documents are included with your purchase and cover all aspects of usage - both remedial and advanced.
SYSTEM REQUIREMENTS:
This editor is current but is still compatible with many earlier
versions of Logic starting with Emagic MAC Version 4.x. It is
compatible with ALL versions of Logic through vX. (Logic X v10.5 has a visual bug concerning button display - corrected in v10.6)
It is also
compatible with Logic Express v7 - 9. If you have a version 8 Logic
you must use v 8.01 or higher which fixes a SYSEX bug that renders v8.0
inoperable.
This editor is also compatible with the v4 - v6 PC
versions of Logic (please specify upon purchase). In all v5's - it
is compatible down to Logic SILVER. NOT compatible with Micro-Logic
or any of the other earlier neutered Emagic bundled versions.
This editor is designed to fit a screen resolution of 1024 X 768 or larger but will also work on smaller screens.
TERMS and CONDITIONS:
Free
Delivery is included with purchase. Delivery is by EMAIL ATTACHMENT
ONLY - and will be delivered ASAP after payment has cleared.
I accept all REVERB payment methods. Because this is a software only item, there are
no returns allowed. Please contact me at or via the
Reverb.com messaging system if you have any questions before the
purchase.
I also offer a customizing service for your software to
help integrate it more deeply into your personal set-up should you
require advanced help. Please contact me here for more info.