This 3U format, 4-Channel Line Output module can translate an unbalanced Eurorack signal into a balanced, line level signal for use with mixers, recording interfaces, for cable runs much longer than traditionally recommended for unbalanced audio. There is in-built attenuation at the input to assure maximum headroom without distortion, allowing for even fairly high level signals directly from oscillators to pass through cleanly.
Due to the nature of the fixed attenuation, there may be slight imbalance between the level of each output. In some specific instances, I have noticed a small amount of ground noise in the signal when the output is connected with no input. This may be a result of differences between power supplies (I personally use a 4MS Row Power, Synthrotek Deluxe PWR, and MMI USB Power Bus for testing) but is generally not noticed.
6HP, approx 38mm deep without power cable. Reversible panel for people who like jokes :) . Handmade in Selden, NY - All modules inspected and tested before shipping. Uses keyed 2x5 pin power header w/ stripe indicator, and is reverse voltage protected.