Originally 300£!
Format conversion the flexible way:
Our quad MIDI
Interface picks up the flexible voice assignment of VERMONA's
PERfourMER MKII to provide a fourfold MIDI-to-CV / Gate converter for
Eurorack-compatible modular systems. This way, you can play your modular
synthesizer in different monophonic modes or even polyphonically using
MIDI.
More than just pitch:
Each of the four "output channels"
offers a CV-output with 1V / octave-characteristic, a gate-output plus
two additional control voltage outputs. These can be easily addressed by
MIDI-controllers such as the modulation-wheel or pitch bender. The
output channels can freely be combined or be used with independent
MIDI-channels. Combined output channels can be used in unison,
monophonically with rotating voice assignment or even to create
polyphony. qMI 2 also offers four clock-divider-outputs. These convert
incoming MIDI-clock signals into analogue gate-voltages. A reset-output
allows sequencers with corresponding input to run in sync by MIDI-start /
stop commands. A new feature of qMI 2 is the option to switch between
both monophonic voice assignment modes using a gate signal.
Easy access to functionality:
An
important part of the modular concept is the easy access to every
parameter, without using displays or complicated menu structures. qMI 2
will help you to integrate your modular-system into your MIDI-setup
straight-forwardly!
-
Pitch-CV: 1V/Octave
-
Gate-voltage: 10V
-
CV1, CV2: 0..5V (bzw. -2,5V..+2,5V on Pitchbend)
-
Legato switchable for each channel
-
Clock-outputs (10V)
-
RESET-Output: 10V for MIDI STOP, 0V for MIDI START and CONTINUE
- 60 mA +12V
- 2 mA -12V
- 0 mA 5V
- 30 mm deep
-
Ø 5.00 (2 Votes) Average Rating