Partscaster Telecaster, w/custom wiring in Gloss Black w/New Skull & Rose Pickguard, New Dunlop Black Straploks, & New HSC, plus a Set-Up

Folks we have here a custom wired series Black Telecaster with a New custom Skull & Rose pickguard, a New Skull & Chains neckplate, a New set of Black Dunlop Straploks & a New Black ABS Hardshell case. 

This is built from Fender licensed and aftermarket parts. This is not a Fender factory built guitar but it is loaded with custom vintage wound alnico II single coils that sound like a real tele should. The tone pot is a 250k pull pot that runs the pickups in series like a humbucker in position 1-2. but it doesn't sound like a humbucker, just a very thick full telecaster. In position 3 it works as a kill switch. When the pot is down, it’s standard telecaster switching. The volume is a Fender American CTS 250k. 

We here @ Rocking the Shack did not do this custom wiring, but the previous owner did! We installed the pickguard, strap locks, neck plate , provided the case and did the set-up.

The neck is maple with a modern medium C profile with a rosewood fretboard and has 22 medium jumbo frets. The neck has a satin finish with no skunk stripe. so it is silky smooth.  It has a solid string thru alder body with gloss black finish.

We have gone through this guitar and given it a complete set-up with 9-42 strings. Spec's for the set up where the same as Jim Weider uses for "Old Yeller", his 1952 Fender Telecaster.

A complete set-up, (a $90.00 value), includes adjustment of the truss rod, string height adjustment (action), Nut adjustment if needed, pickup height adjustment w/pickup poles radius set and intonation set. Along with a set-up we do a fretdress which includes precision leveling, re-crowning and polishing of the instrument's frets. Also the fretboard was cleaned and oiled along with the whole guitar cleaned and polished.