Similar Listings

Price Drop
Taurus Stomp-Head 1.VT pedalboard amp.
Used – Excellent
Aptos, CA, United States
Originally $425, now $400 ($25 price drop)
Franklin, TN, United States
Originally $499, now $419 ($80 price drop)
Glens Falls, NY, United States
$467.17
Carrboro, NC, United States
Originally $249, now $236.55 ($12.45 price drop)
Hicksville, NY, United States
Originally $465.54, now $395.78 ($69.76 price drop)
Bethlehem, PA, United States
$399
Towson, MD, United States
Originally $714.99, now $580.75 ($134.24 price drop)
Lewistown, PA, United States
$345
Gas City, IN, United States
$399.99

The Stomp-Head 3.High Gain is an extremely light and small but still powerful and great sounding guitar amplifier.  Voltage switching 115/230V

SH3.HG design is based on a MTD (Master Tube Design) technology. It is our own groundbreaking technology which permits us to create great sounding, powerful, fully analog amplifiers with extremely light weight and very compact dimensions. This technology uses all the significant features of tubes which determine the warm, classic sound of guitar amps. The sound characteristics and power of amplifiers based on our MTD technology are equal to the classic tube amps with the same power rating.

The guitarist has an access to two channels (CLEAN and LEAD) chosen by footswitch. CLEAN channel gives a choice of two different sounds: CLEAN or slightly distorted CRUNCH which can be smoothly adjusted by a GAIN potentiometer Two additional foot switches are assigned to control BOOST and MUTE functions. The Stomp-Head’s 3 is equipped with power selector that allows to set 60Watt or 25Watt in STAGE MODE and 15Watt or 7Watt in STUDIO MODE. The amp is designed to work with 4, 8, and 16 ohm cabinets (Power Amp adjust itself automatically to speakers impedance)The Stomp-Head can also be used as a guitar preamp, without connecting speaker cabinet.The LINE OUT (with a Speaker Cabinet Simulation) allows connect the amplifier to a mixer or an external power amp. The Speaker Cabinet Simulation imitates sound of the 4 x12 CELESTION Vintage 30 cabinets. The amp is also equipped with a serial Effect Loop.
The guitarist has an access to two channels (CLEAN and LEAD) chosen by footswitch. CLEAN channel gives a choice of two different sounds: CLEAN or slightly distorted CRUNCH which can be smoothly adjusted by a GAIN potentiometer Two additional foot switches are assigned to control BOOST and MUTE functions.

SH-3.HG is equipped with power selector that allows to set 60Watt or 25Watt in STAGE MODE and 15Watt or 7Watt in STUDIO MODE. The amp is designed to work with 4, 8, and 16 ohm cabinets (Power Amp adjust itself automatically to speakers impedance)
The Stomp-Head can also be used as a guitar preamp, without connecting speaker cabinet.
The LINE OUT (with a Speaker Cabinet Simulation) allows connect the amplifier to a mixer or an external power amp. The Speaker Cabinet Simulation imitates sound of the 4 x12 CELESTION Vintage 30 cabinets. The amp is also equipped with a serial Effect Loop.

LINE OUT with a speaker cabinet simulation allows the connection of the amplifier to a mixer or an external power amp. LINE OUT signal simulates the sound of the 4x12 CELESTION Vintage 30 cabinet. Device is also equipped with a serial effect loop.
Stomp-Head 3.HG (3 footswitches)

  • Power output: 60W or 25W / 4ohm, 8ohm,16ohm in STAGE MODE and15W or 7W / 4ohm, 8ohm,16ohm in STUDIO MODE
  • Power stage efficiency: 130Watt
  • Speakers impedance auto detection
  • Tubes: 12AX7
  • 2 channels: CLEAN and LEAD
  • 3 footswitches: CHANNEL [Clean/ Lead], BOOST, MUTE
  • CHANNELS controls: (CLEAN & LEAD): GAIN, BASS, MIDDLE, MID-RANGE switch, TREBLE, PRESENCE, VOLUME and BOOST shared by both channels
  • Input GAIN boost (switch +6dB)
  • BOOST: immediate access to two different volume levels
  • Serial EFFECT LOOP
  • LINE OUTPUT with speaker simulationThe ability to send the linear signal with or without simulation or both at the same timeLINE OUTPUT with Speaker Simulation. Allows send linear signal with simulation (PIN) or without simulation (RING) or both simultaneously
  • INPUT for external channel selector/controller
  • HEADPHONES OUTPUT
  • AUX-INPUT allows connect an audio player or send monitor signal to the headphones.
  • The AUX signal is send only to the headphones, bypassing the speakers.
  • MIX-MODE both amps channels can be mixed and used simultaneously
  • Power Output selector STAGE / STUDIO
  • Dimensions: [H x W x Dl] 90 x 270 x 205 mm
  • Weight: 2.2kg

Reverb Buyer Protection

Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.

Listed3 years ago
ConditionMint (Used)
Mint items are in essentially new original condition but have been opened or played.Learn more
Brand
Model
  • Stomp-Head 3.HG 60Watt
Finish
  • White / Black
Categories
Year
  • 2020
Made In
  • Poland

NordSound Guitarshop

Esse, Finland
Sales:504
Joined Reverb:2016

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

Oops, looks like you forgot something. Please check the fields highlighted in red.