Definitive Technology BP7002

Pair of Definitive Technology BP7002 in mint condition. 
Life-like, spacious sound for every listener in the room

The Bipolar SuperTower™ series combines bipolar speaker design with Definitive's SuperCube® subwoofer technology to give you spacious, lifelike sound and rumbling bass. The BP7002 is Definitive's flagship bipolar speaker, using both front- and rear-firing driver arrays to radiate full-range sound in all directions. Even in large rooms, every listener will experience a huge, three-dimensional soundstage with both music and movies.

Innovative bipolar design produces an exceptionally wide, deep soundstage

Each speaker array in the BP7002 consists of two 5-1/4" mid/bass drivers with a 1" dome tweeter. This bipolar design means that direct sound from the front drivers arrives at your ears first, to provide clear, focused imaging. That's followed by sound from the rear drivers, which is slightly delayed, to enhance spaciousness. The combination creates a lush, seamless soundstage that's more like the way we hear sounds in real life.

Powerful bass built right into each cabinet

At the base of each speaker is a 12" side-firing subwoofer coupled to two bass radiators on the opposite side of the cabinet. This trio creates a total surface area that's greater than that of a traditional 18" woofer, but has better bass control, speed, and detail than a single huge woofer could achieve. A built-in 300-watt amplifier powers the subwoofer, delivering massive bass that eliminates the need for an external sub. Having the subwoofer built into the same cabinet gives you the advantages of having your sound system's bass already perfectly blended with the mids and the highs, and means that you won't have to find floor place for a standalone subwoofer. And with a pair of BP7002s, you get two subs in your setup instead of just one.

Room-friendly sound allows flexible placement

The BP7002's slim cabinet takes up less than a square foot of floor space, yet its bipolar design produces twice as much sound in your room as a conventional speaker. A sophisticated crossover equalizes the front and rear drivers separately for more precise control of their combined output. The bipolar driver arrays are wired together internally, so you connect the BP7002s to your receiver as you would conventional speakers, using one set of wires per speaker. For best results, position the BP7002s from 4" to 24" out from your wall.

Product highlights:

• bipolar speaker technology
• frequency response 15-30,000 Hz
• sensitivity 92 dB
• 8-ohm impedance
• handles up to 400 watts
• video-shielded for safe placement next to any TV
• front array: two 5-1/4" woofers and 1" pure aluminum dome tweeter
• rear array: two 5-1/4" woofers and 1" pure aluminum dome tweeter
• one 12" long-throw subwoofer coupled to two 12" low bass radiators
• built-in 300-watt subwoofer amplifier with adjustable volume control
• subwoofer auto on/off
• one pair of 5-way binding posts
• line-level LFE input (optional connection for use with receivers with LFE output)
• 6-foot AC power cord
• piano-gloss black finish
• 7-1/4"W x 46-11/16"H x 16-15/16"D
• MFR # BP7002