Brand: Ensoniq
Model: TS-10, TS-12, SD-1, VFX-SD, KS-32, SQ-1, SQ-2
Including:
√ 2 x Eproms
Installation:
1. Open your device
2. Locate your Eprom socket and note the notch orientation.
3. Pull up the Eprom
4. Insert the new eprom with the notch in the same direction as you noted in point 2.
Features and further details:
This is a turbocharger kit of the sequencer memory for various Ensoniq models. This memory upgrade was an optional upgrade for the devices in the early 90s. This kit includes two chips, which have to be inserted / installed in IC sockets. For more info, please read below:
Features:
Increases sequencer capacity, reduce disk swaps, prolong floppy drive life, and load larger songs.
TS-10 / TS-12 - Expands from 30,000 to 97,000 notes
SD1, SD1-32, VFX-SD - Expands from 25,000 to 75,000 notes
SQ-1, SQ-1 Plus, SQ-2 - expands 9,000 to 58,000 notes
KS-32 - Expands from 8,500 to 58,000 notes.
To check current installed memory:
Erase all sequences from memory and check the number # of free notes. If your device already have the expansion, then you should have as listed above.
Grade:
- Fully verified before shipping and professionally packaged in anti-static material
- VFX and SQ in rack versions are not capable to use SQX-70
- VFX-SD must be OS 1.37 or higher.
- SQ-1 must be OS 1.01 or higher.
- SD-1 32-Voice keyboards already have expanded sequencer memory, and will not need this kit.
░░░░░░▒▒▒▓▓Why buy from MonoTanz?▓▓▒▒▒░░░░░░
⸎ Tested functionality before shipping.
⸎ Free technical support. [English, German and Danish]
⸎ We try to keep our shipping rates as low and transparent as possible with tracking, so you are able to follow your shipment online.
► Summa summārum: We provide a good product with confidence, transparency and honesty, which will improve the functionality of your equipment.
░░░░░░▒▒▒▓▓Important notes:▓▓▒▒▒░░░░░░
⸎ All EPROMs are properly packaged in anti-static material to ensure quality.
⸎ This is firmware on Eprom only, the device itself is not included.
⸎ Backup any data you don't want to lose before starting. Factory Reset is often required, when you replace the firmware to flush-out data from the old system.
⸎ Please feel free to drop us a message here, per mail or over our Facebook Chat, if you have any problems or questions.
░░░░░░▒▒▒▓▓Disclaimer:▓▓▒▒▒░░░░░░
Installation of this part along with any associated risks involved in the process are the responsibility of the buyer. Be sure to back up any data and unplug the unit before installation.
Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
Brand | |
Model |
|
Categories | |
Year |
|
Made In |
|