Pintech Pintech PDK2000 Electronic Drum Kit - Kit Rack Setup With PC Cymbals - PC Cymbals Standard

Unbelievably realistic feel:
Our ConcertCast drums feature a mesh drum head that has been specifically engineered to feel as natural as possible, while being some of the quietest playing surfaces ever.  You will notice incredible rebound and reaction from the mesh heads.  Our world-renowned triggers have now been reinforced, and we have increased the sensitivity to allow lightning fast triggering and the best drumming experience possible.  Our triggers are 100% positional sensing, and you will be in awe at the incredible sensitivity of the head and rim triggers.

CenTRIG Technology:
Our ConcertCast series drum pads feature our head trigger directly in the middle of the drum pad.  This allows you to have a perfectly evenly placed drumming experience.  Our research has shown that drummers prefer the trigger to be located directly in the middle, as it feels most natural to them.

EZ-Tune Technology:
Our ConcertCast Series drum pads feature sensitivity knobs directly on the shell.  Dual zone drum pads feature independent EZ-Tune knobs to separately increase or lower the sensitivity for both the head and rim right there on the spot.  No need to go into your module to independently change the sensitivity for your drum pads.  Do it on the fly, and spend more time playing!

Large Playing Surfaces Offer the Best Feel:
The PDK2000 features large drum and cymbal sizes that mimic acoustic drum sizes.  Our ConcertCast Series snare is a large 10″ dual zone snare that feels incredible.  The heightened sensitivity allows the lightest of hits to trigger, while giving you a large playing surface.  The PDK2000 comes packed with (2) 8″ dual zone drum pads.  The 8″ toms also feature our heightened sensitivity, and allow you to play as hard or as soft as you’d like, while registering everything you throw at it.

One Piece Cast Metal Shells:
Pintech’s ConcertCast series drum shells are made out of a 1-piece cast metal.  No plastic here folks!  These are about as heavy duty as they come.  Our drums are made to be on the road, beaten, thrown around and played for years and years.  If you want a product that is built to last, then look no further than Pintech’s ConcertCast Series drum pads.

Incredible Multi-Zone Cymbals:
Our PC Series cymbals are made out of the same material that bullet proof glass and riot shields are made of.  This material is STRONG, and offers an incredible feel for the drummer.  The PDK2000 features FULL SIZED cymbals in various options that drummers want.  14″ hihat cymbal, 14″ dual zones with choke and a 16″ ride cymbal with a bell.  Our PC Series cymbals have a low profile rubber strike-pad attached to lower the sound and increase the rebound.  Each cymbal comes with a cymbal spring that gives you the natural feedback you would expect our of an acoustic cymbal.  The cymbals will actually move while you play them, rather than stuck in one place.

A Kick Drum fit for a King:
Our 10″ CKV kick drum features a mesh head that allows more than enough room for single or double pedals.  Sturdy enough to take anything you can throw at it, but incredibly sensitive and agile.  Universally allows any single or double pedal to attach to it, and features 2 angled back legs that give it incredible stability.

Reinforced Drum Rack Loaded with Adjustments:
The PDK2000 drum rack is loaded with various adjustments.  You aren’t stuck with a limited amount of configurations.  Each pad and cymbal can be located ANYWHERE on the drum rack.  You aren’t stuck with placing the cymbals or drum pads in certain places.  Set it up the way you want.  Combine that with our included reinforcement bars to maximize strength and stability.

• (2) 10″ Dual Zone ConcertCast Mesh Pad w/EZ-Tune Technology
• (2) 8″ Dual Zone ConcertCast Mesh Pads w/EZ-Tune Technology
• (1) 14″ PC Series Dual Zone HiHat
• (2) 14″ PC Series Dual Zone Cymbal with Choke
• (1) 16″ PC Series Dual Zone Ride with Bell (Bell & Bow Only)
• (1) 10″ CKV Kick Pad w/EZ-Tune Technology
• (1) Pintech Variable Hi-hat Controller

• (1) 36″ Curved Horizontal Bar
• (2) 36″ Straight Upright Bars
• (1) 22″ Straight Extension Bar
• (2) 22″ Straight Bar with Rubber Feet
• (2) 14″ Straight Extension Bar
• (8) L-Rod Clamps (LMA-C) (Plastic)
• (4) L-Rods
• (7) T-Clamps (Plastic)
• (2) CA-1 Straight Cymbal Arm
• (1) CA-2 Cymbal Boom Arm
• (1) HiHat Stand