Upgrade wiring kit Pre-wired NOS PIO cap CTS pots fits Fender Precision PBass

"Vintage Relic pre-wired upgrade kit fits Fender Precision Bass. New. This is the best and most economical way to improve the tone of your PBass! Complete harness--just add your pickups and you're ready to go! MADE IN USA.

• CTS 250k solid shaft pots +10% tolerance. We measure each pot and use ones with higher readings for the volume pots (275k+).
  
• 1 NOS PIO (paper-in-oil) tone capacitor. New old stock Russian K42Y-2 .047uF capacitor. We add cloth shielding to the terminals to prevent a "ground out." These are GREAT sounding caps. TONE!!
  
• All cloth vintage style 22 ga push back wire.
  
• Bridge ground wire soldered to the volume pot.
  
• Switchcraft 1/4" output jack pre-soldered.
  
• Wiring diagram included."
  

Distance between the components (center to center); if you need different spacing, let us know:

volume to tone = 2.1"
tone to jack = 1.85"

Above text and pictures copyright Vintage Relic. All rights reserved.

NOTE pot specs to make sure this will fit your bass:

• Can Size = 15/16 in. radius X 3/8 in. height
• Bushing Threads = 3/8-32
• Bushing Height = 3/8 in.
• Shaft Type - solid
• Shaft Diameter = .25 in (6.35mm)
• Spline Count = no splines / smooth shaft
• Shaft Length = 3/8 in.
• Hole size requirement = 3/8 in.
• Value = ~275K Ohms