Ampeg SVP-BSP Tube Bass Preamp
This gear has sold
See similar gear from other Reverb sellers
Listed:5 years ago
Views:810
Watchers:27
Davie, FL, United States
Our users rate Reverb
Ampeg SVP BSP Tube Bass Preamp
No issues/Excellent +++ Condition
Please ask any questions
Features:
In the world of high performance bass amps, Ampeg’s SVT amplifiers stand alone. Keeping with true Ampeg tradition, the SVP-BSP Bass Preamp offers you more performance and flexibility than any other preamp in its class. Listed below are some of the outstanding features of your new preamp - features which set it apart from the competition!
• PAD: Perfect for basses with active electronics or very “hot” pickups
• MUTE SWITCH: Cuts the sound from the preamp, letting you tune your bass in private
• TWO SEPARATE CHANNELS: Choose between the clean channel, the overdrive channel, or both, for a wide variety of sounds
• COMPRESSOR SWITCH: Evens out your volume by governing the dynamic range of the preamp
• ULTRA LOW, ULTRA HIGH AND GAIN BOOST SWITCHES: For additional tonal flexibility – lets you further tweak your sound
• VARIABLE MIDRANGE SELECTOR: Custom select your center frequency point to get just the right midrange voice
• GATE SWITCH: Keeps things quiet in between bass riffs
• FOOTSWITCH CONTROL: Use a two-button footswitch (like Ampeg’s AFP-2 not included) to control channel selection and muting
• TWO EFFECTS LOOPS: Lets you add your effects to either channel
• TWO PREAMP OUTPUTS: Each channel has its own 1/4” jack to send its signal to separate amps/speakers if desired
• TWO TRANSFORMER-BALANCED XLR OUTPUTS: Each channel has its own XLR jack (with level control) to send a balanced signal from the preamp
Technical Specifications
TOTAL SYSTEM GAIN: Clean Channel 22dB, @1kHz w/levels up, tones flat Overdrive Channel 80dB, @1kHz w/levels up, tones flat
TONE CONTROL RANGE: Clean Channel Bass: 20dB range @ 40Hz Midrange: 21dB range @ 300Hz Treble: 18dB range @ 10kHz Ultra Low: +5dB @ 30Hz Ultra High: +7dB @ 15kHz Overdrive Channel Bass: ±12dB @ 100Hz Midrange: +20dB, -5dB @ 300 – 2kHz Treble: ±12dB @ 7kHz
SIGNAL TO NOISE RATIO: 80dB typical, Clean channel
TUBE COMPLEMENT: 12AX7 (1)
POWER REQUIREMENTS: 120VAC, 60Hz, 15VA
SIZE AND WEIGHT: 19”W x 1.75”H x 10”D; 10 lbs
Shipping $35 Contiguous US only
No issues/Excellent +++ Condition
Please ask any questions
Features:
In the world of high performance bass amps, Ampeg’s SVT amplifiers stand alone. Keeping with true Ampeg tradition, the SVP-BSP Bass Preamp offers you more performance and flexibility than any other preamp in its class. Listed below are some of the outstanding features of your new preamp - features which set it apart from the competition!
• PAD: Perfect for basses with active electronics or very “hot” pickups
• MUTE SWITCH: Cuts the sound from the preamp, letting you tune your bass in private
• TWO SEPARATE CHANNELS: Choose between the clean channel, the overdrive channel, or both, for a wide variety of sounds
• COMPRESSOR SWITCH: Evens out your volume by governing the dynamic range of the preamp
• ULTRA LOW, ULTRA HIGH AND GAIN BOOST SWITCHES: For additional tonal flexibility – lets you further tweak your sound
• VARIABLE MIDRANGE SELECTOR: Custom select your center frequency point to get just the right midrange voice
• GATE SWITCH: Keeps things quiet in between bass riffs
• FOOTSWITCH CONTROL: Use a two-button footswitch (like Ampeg’s AFP-2 not included) to control channel selection and muting
• TWO EFFECTS LOOPS: Lets you add your effects to either channel
• TWO PREAMP OUTPUTS: Each channel has its own 1/4” jack to send its signal to separate amps/speakers if desired
• TWO TRANSFORMER-BALANCED XLR OUTPUTS: Each channel has its own XLR jack (with level control) to send a balanced signal from the preamp
Technical Specifications
TOTAL SYSTEM GAIN: Clean Channel 22dB, @1kHz w/levels up, tones flat Overdrive Channel 80dB, @1kHz w/levels up, tones flat
TONE CONTROL RANGE: Clean Channel Bass: 20dB range @ 40Hz Midrange: 21dB range @ 300Hz Treble: 18dB range @ 10kHz Ultra Low: +5dB @ 30Hz Ultra High: +7dB @ 15kHz Overdrive Channel Bass: ±12dB @ 100Hz Midrange: +20dB, -5dB @ 300 – 2kHz Treble: ±12dB @ 7kHz
SIGNAL TO NOISE RATIO: 80dB typical, Clean channel
TUBE COMPLEMENT: 12AX7 (1)
POWER REQUIREMENTS: 120VAC, 60Hz, 15VA
SIZE AND WEIGHT: 19”W x 1.75”H x 10”D; 10 lbs
Shipping $35 Contiguous US only
This item is sold As-Described
This item is sold As-Described and cannot be returned unless it arrives in a condition different from how it was described or photographed. Items must be returned in original, as-shipped condition with all original packaging.Learn More.
| Listed | 5 years ago |
|---|---|
| Condition | Excellent (Used) Excellent items are almost entirely free from blemishes and other visual defects and have been played or used with the utmost care.Learn more |
| Brand | |
| Model |
|
| Categories | |
| Made In |
|
Product safety information may be available here.
