The Laney Ironheart IRT Studio head offers 1 watt or 15 watts of all-tube power, USB audio I/O, a re-amping send, and even a 1/8" jack for your MP3 player.

Super-Versatile Laney Amp Head for Stage or Studio!
Get ready for a versatile amp head to deliver the goods -- the Laney Ironheart IRT Studio Guitar Amplifier is ready to fuel your signal with power and superior all-tube tone. With a no-latency USB audio I/O and re-amping send, three channels of tone, three-band EQ controls with push/pull EQ shift, Laney-designed digital reverb, an internal dummy load, a high quality speaker-emulated record out, and a long line of controls to manipulate your signal, your IRT Studio amp head will bring pristine tube tone to your recording studio or live rig.

Zero-Latency USB Output of Dry and Processed Signal
Your IRT Studio amp head comes ready to connect to your DAW in no-latency fashion while delivering real all-tube tone. Your USB connection provides both the dry signal and the processed version -- split left and right -- into your DAW system. This allows you to alter and tweak the tone of your original recording so you don't have to go back and do a re-tracking of everything again.

Three Channels -- Lots of Tonal Options
You have a lot of tonal options when reviewing your IRT Studio's avenues of sound. This baby provides three separate channels to play around with -- clean, rhythm, and lead channels. Your clean offers that warm color you'd expect from an all-tube head. Your rhythm breaks up your signal a little, providing nice percussive crunches, and your lead channel brings in a searing distortion. The tones achieved through this head have the range, sustain, and definition for lower-ranged instruments -- like seven-string guitars or detuned guitars -- as well.

Mad Controls for Tone Freaks
Along the front panel of your IRT Studio head are two rows of nicely laid out controls. You have clean volume, footswitchable pre boost, rhythm gain, lead gain, rhythm volume, lead volume, dynamics, tone, and reverb controls. Three-band EQ controls with push/pull EQ shift are also at your finger tips. Your clean and rhythm channels share the top row and your lead has its own EQ controls row below it.

Internal Dummy Load and Speaker-emulated Record Out
To keep your signal truly silent, your IRT Studio head harnesses an internal dummy load which, unlike most tube heads, allows you to bypass the implementation of an external speaker cab. Immediately after the output section is a high integrity speaker-emulated record out which allows you to project that all-tube tone into your DAW, a PA system -- or both -- for either recording sessions or live shows.

- Two 1/4" input jacks -- one at 1 watt, the other at 15 watts
- Three channels -- clean, rhythm, and lead
- Three-band EQ controls with push/pull EQ shift
- Laney designed digital reverb
- Clean volume, foot switchable pre boost, rhythm gain, lead gain, rhythm volume, lead volume, dynamics, tone, and reverb controls
- Three ECC83 preamp tubes; two EL84 output tubes
- XLR DI out
- Variable level FX loop
- 1/8" jack for MP3 player
- USB audio I/O and re-amping send
- FS4-IRT footswitch included -- controls channel, clean, reverb, and pre boost settings
- Rack wings supplied
- Dedicated gig bag included

- Inputs: 1 x Jack 15 Watts & 1 x Jack 1 Watt
- Power: 15 Watts & < 1 Watt
- Channels: 3 - Clean, Rhythm & Lead
- Equalization: Bass, Middle & Treble with Pull-Push EQ shift on each
- Master Presence Control: Overall TONE
- Boost Switch: Footswitchable PRE BOOST
- Preamp Valves: 3 x ECC83
- Output Valves: 2 x EL84
- Class: Class AB
- Reverb: Laney designed Digital reverb
- Footswitch: FS4-IRT supplied as standard - switches Channel, Clean, Reverb & Pre Boost
- Speaker connections: 1x Jack switchable 8 or 16 Ohms
- FX Loop(s) : Yes - variable level FX loop
- Output Attenuation: VARI WATTS feature via input 15 Watts or < 1 Watt
- Internal Dummy Load: Silent Recording - no need to connect an external speaker
- Speaker Emulated Record Out: Direct out from the power amp tubes - delivering all valve tone recorded as well as live
- MP3 Input: Mini Jack
- DI Socket: XLR DI out - cabinet emulated
- USB Connectivity: USB Audio I/O for use with any DAW
- RE-AMP: Enabled IRT STUDIO sends DRY Guitar (left) and AMPED guitar right and is equipped with a RE-AMP function for use with any DAW
- Bag: Supplied with dedicated gig bag
- Rack Wings: Supplied
- Weight: 11 Kg Packed 5.5 Unit
- Packed Dimensions: (HxWxD) 200x 603 x 350mm
- Unit Dims: - for int. case (HxWxD) 88 x 428 x 285mm - 2U 19" Rackmount

zZounds is an authorized dealer of Laney products.

ConditionBrand New (New)
Brand New items are sold by an authorized dealer or original builder and include all original packaging.learn more
  • IRT-Studio Ironheart Rackmount Tube Guitar Amp Head

Reverb Protection

Simple Returns, Secure Transactions, Human Support

Learn more

Secure Checkout


Oakland, NJ, United States
Joined Reverb:2016

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

Oops, looks like you forgot something. Please check the fields highlighted in red.