Acoustic Image Acoustic Image Ten2 S4plus 2020 Black

****Clearance sale due to model change****

2 ch 600watt Convertible Combo with Effects
Genius Combo Design

• for Accoustic
• for Jazz
• for any kind of effect pedal
• for any kind of amp modelling

Features – Amp Head

• Extended frequency range, high fidelity sound
• Light weight (<4 lbs.), small size (10.2"x 8.2"x 3.5")
• Unique, slanted front chassis
• Mounts in cabinet using Cabrio Docking System
• Separate XLR and 1/4 inch inputs in each channel can be used simultaneously
• 48V phantom power and 10 dB gain select for mic input
• Input level control per channel
• Four band EQ per channel
• Selectable phase reverse and sweepable low cut filter per channel (phase reverse can be converted to low pass speaker emulation filter with internal jumper option)
• Effects loop per channel
• Selectable reverb and delay effects with level and rate controls and pseudo stereo output
• Direct out with selectable 10 dB pad, pre/post switch and ground lift headphone output
• Switchable limiter
• Mute switch
• Mono or stereo output from the preamp section
• Selectable internal jumper options for gain and stereo operation
• High fidelity, low noise operation: 110 dB SNR at direct out        
• Automatic voltage switching for universal AC mains operation
• 650 Watt output at 4 ohms (music power)
• Dual speaker outputs with speakon connectors

Features – Speaker Cabinet

• Sealed two-way speaker system
• Lightweight (22 lbs) structural foam cabinet
• Downfiring poly cone 10 inch driver + 10 inch midrange with level switch
• Comes with a fitted slip cover with shoulder strap

Room Coupling Control
It is used to control the low frequency output of the downfirring woofer. it is usefull in controlling "boominess" in difficult acoustic sttings.It's a three postion switch.- Experiment with the control so you can get a good idea of it's effect on the sound. 

Total weight: 16,1kg
Comes with a fitted slip cover with shoulder strap

FACTS Frequency Response 30 Hz-18 kHz (40-14 kHz ±3 dB) Max SPL >112 dB at 1 meter AC Power 100V to 240V, 50/60 Hz, switched automatically Size 12"H x 15"W x13"D Weight 22 lbs, 19 lbs (EX) Amp Head Frequency Response 20 Hz - 20 kHz (±0.5 dB) Signal to Noise Ratio >110 dB at direct out Controls and Inputs Mic Input 600 ohm balanced, XLR connector, switchable 10 dB gain Phantom Power 48 volts, on/off switch w/LED indicator Instrument Input 1 M Ohm impedance, 1/4 inch jack Direct Out +4 dB, balanced, XLR, ground lift, pre/post EQ selector, switchable 10 dB pad Effects Loop Parallel type Low Control Shelving type, ±12 dB at 50 Hz Low Mid Control ±12 dB at 250 Hz Hi Mid Control ±12 dB at 1200 Hz Treble Control Shelving type, ±12 dB at 8 kHz Low Cut Filter -12 dB/octave sweepable from 30 to 150 Hz Phase Reverse Switchable 180 degree phase reverse Speaker Emulator (if selected) -12 dB/octave at 4 kHz Effects Type 24 bit digital with 3 programs Programs Reverb with variable decay time, Delay/Reverb with variable delay time Delay with variable delay time All have variable wet/dry mix and “pseudo stereo” capability Amp head Topology Class D (PWM) Switching Frequency 500 kHz Output Power 8 Ohm 300W rms continuous, 350W rms music (40% duty cycle), 500W peak transient Output Power 4 Ohm 500W rms continuous, 650W rms music (40% duty cycle), 1000W peak transient Ext Speaker Output Speakon type (pole 1), 2 Ohm min load including internal speakers, if connected Speaker System Woofer 10 inch, downfiring Midrange 10 inch, forward firing with 2 position level control switch Crossover Passive, alignment corrected Room Coupling Control Tweeter Atenuator Impedance 8 Ohm Power rating 250W Supplied Accessories Fitted slip cover with cord storage pocket and shoulder strap