Well-Hung Pro-Pins - THREE Pairs (6) Oversize Strap Buttons, Jumbo Strap Pins 2021 Nickel

This listing is for THREE (3) PAIRS

Wider: 18mm (vs 11 or 12 for most others)
Deeper: 10mm (vs. 5 or 6 for most others)
The photo compares to a typical F-style space capsule button, read the feedback reviews. Simply are far superior, sexy and do NOT look funky on any guitar. They'll make it look and feel like a working pro instrument. Sold regularly to roadie guitar techs and luthier/builders looking for THE answer.

This listing is for THREE pairs. They work with every stock strap I have tried with no modifications, though it may be a tighter fit to start. All Well-Hung Tribe-members are used to this, but appreciate it. ;-)
The screw is longer, slightly bigger, the shaft of the button is slightly deeper and will accommodate even thick strap ends. I carefully designed this button so the screw will not wiggle/wobble inside the button shaft. Extremely tight tolerance. This is absolutely key to the performance of these pins - once a button starts turning, it will soon start wobbling. Faster than you think, you will be reduced to a pitiful state of mental anguish, on your knees screaming at the sky like some terrible green-haired progressive political snowflake meme. "Like how could this even HAPPEN to ME? REEEEEEE!!!!!!!" 

Thankfully, Pro-pins can prevent that. I should charge more for the mental pain and suffering and psychiatric costs you will surely avoid by adopting these.

These buttons are not for all guitar applications. But, if you are suffering strap doubt, "toothpick & gluthery," or the unsurprisingly distressing exploding strap-lock contraption syndrome, this here is a 100% better, simpler and more elegant lasting solution. End your constant fixery-fuggery or noisy, clunky or plasticky strap-end complication gimmick-gadgets.  You'll only have to do this to a guitar once,then, it will make you smile EVERY TIME you put your strap on, or take your strap off. You want to be smiling before you play. Not grumbly. 'Cept maybe dark metal guys.

I recommend you do this before you need toothpicks and gluthery, which seems to eventually happen to most of us. Plus. if you are one of those folks, you can still use your precious rubber beer washers, even with quality heavy leather-ended straps such my own Well-Hung brand. With these buttons, your beer washer won't pop off suddenly, or slowly jack your button screw loose because of too much rubbery pressure like they will on most other strap buttons. You hate this. It is the work of the devil. 
 
Milled from solid aluminum, and nickel-finished, each comes with felt washers or you can request leather washers. Sometimes I include all types and spares just for fun.

You need these.
 
These are not for acoustic guitars, unless you are going into the heel or you know you have plenty of deep wood. Be wary of them going into iffy places like an SG horns, or any guitar neck - don't be a doofus. They do stick out just a little bit more, so depending on placement, may not work well if your button screws into the backside of your guitar. Pauls, strats, teles, explorers, firebirds... pretty much A-OK.  The screw is a bit longer and a size or two up from most stock strap button screws, or total just under an inch of thread length, after the washer. Do not attempt to use your stock button screws with Well-Hung Pro-pins, it will NOT work they will be too short to bite into the wood properly. Repeat that last sentence please.

No instructions will be included, but you will require a philips screwdriver and some common sense.  Please do not install while buzzed, and/or you are considering alcoholic beverage #5.

I cannot accept offers. These cost me quite a lot to design, have engineered and get milled and finished. They are absolutely worth every penny I ask, if not more.  Some have described them as "beautiful" others as "finely machined" one as "Bomb-Proof." All correctly.   

Wean yourself off gadgets and gimmicks.  You don't need guitar binky-pacifiers to make you feel secure.