Joe Till No. 179 Short Scale Solidbody Electric Guitar USED - Vintage Cherry Burst
This listing has ended
View similar gear from other sellers on Reverb
Watch this gear and we'll notify you if it becomes available again.
Serial # 0179
7.6lbs
From joetillguitars.com website (2013):
"Spotlight: No. 179 Short Scale Solidbody
After 17 years of building guitars, I've finally learned to keep my grubby little mitts off of my new ones. Now, after I wire them up and do the initial setup, I box them up and put them away to keep them nice and new for the buyer. Otherwise, I'd be all over this little beast. Why, it'd be in shreds by now. Practically a Relic!
Rarely for a TG-250 model, no.179 sports the
fast and ferocious 24 3/4 inch scale. All but a few have had the more
stately 25 1/2 inch scales. The difference is pretty noticeable to a
lead player. Not only are the frets closer together, but the strings
require less tension to get up to pitch... bending is a breeze, and you
can go crazy with vibrato. By the fourth set, these can be very welcome
features on a guitar - especially if you're a Johnny Winter fan.
Even
more rare is this guitar's solid body. I haven't made a solidbody since
the last century! And this is the first solid TG-250 ever. There is
hardly any weight penalty because I used basswood in the core which is
not only light in weight, but also has great tone.
And, speaking of angles... no.179 has them in all the right places. The headstock is tilted about 13 degrees which puts plenty of downward pressure on the nut which adds to the overall resonance, and it helps you stay in tune as you bend strings up to your chin.
Also, the glued in setneck is angled away from the body by about 2 1/4 degrees, which leads to a steeper break angle off the bridge... also for improved resonance.
Again, provides the horsepower. After many dozens of guitars, I still find the SH-2 "Jazz" (neck) and the SH-4 "JB" (bridge) to be simply magical. Both are tapped for singlecoil or full humbucker operation. From twangy jangle to fatty beef at the flick of a switch. Clean when you need clean, and just the right amout of dirt when you crank them up. And, like my guitars, Seymour Duncan pickups are handmade in California!"
Product Specifications- Handmade in California by Joe Till. Completed June 27th, 2012
- Curly Maple cap, back, bezels, control plate, and neck
- Solid Basswood core
- 2 humbucking pickups- Seymour Duncan SH2 (neck), SH4 (bridge)
- TonePros Tune-o-matic bridge and tailpiece
- Grover Rotomatic tuners
- Glued-in Maple/Walnut neck
- 24 3/4 scale
- 12" fretboard radius
- "Vintage Cherry Burst" finish (lacquer)
- Set neck
- Rosewood fingerboard and knobs - Indian Rosewood
**Guitar is used and in great condition. Has some small marks on the side (see picture)
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
| Listed | 4 years ago |
| Condition | Very Good (Used) Very Good items may show a few slight marks or scratches but are fully functional and in overall great shape.Learn more |
| Brand | |
| Model |
|
| Categories | |
| Body Type |
|
