Analogman AR20DL Analog Delay Free Shipping

Sorry, this listing is no longer available.

Sold!

Here's a rare Analogman AR20DL analog delay pedal. You don't really see these pedals floating around too much and for good reason. This is the warmest delay pedal I have ever heard, it would make Neil Young proud.

From the Analogman site:

This Analog Man AR20DL Analog Delay is a BASIC analog delay, think of it as like a Boss DM2 or DM3. It's a basic pedal but the tone is really good. Like a DM2, it is not true bypass, but we tuned the buffer in it really well. So if you ever turn it off, you will have a nice strong signal going to your amp. I don't like more than a few buffers in your signal path, but if you have one, this is a good place for it to be (delays are usually at the end of your pedal chain).

The old Ibanez AD80 and some early DM2 pedals used the 3005 chip which works best at high voltage (the old AD80 used two 9V batteries to get 18Volts, which was internally regulated to 12V). The Maxon AD900 was another awesome sounding analog delay which ran at 12V with 3005 or 3008 chips. But most people prefer 9V power supplies and battery power for ease of use, so we made this delay with the 3205 chip which runs on 8V to 9V just fine, like the later DM-2 and DM-3 and original AD-9 pedals.

All delay pedals have two signal paths which are combined at the output - the "dry" signal (your normal sound) and the delayed or "wet" signal (the echoes or repeats). Our idea is to get a powerful tone, from a combination of the higher voltage (9V raw voltage) feeding the audio signal dry circuit, with good delay tone gotten from the wet BBD circuit driven by our internally regulated 8V supply.

So we think the AR20DL has a similar tone to the DM-2 with a 9V power source, or the AD-900 with a 12V power source. Ours is tuned for a strong, warm, and clear dry normal tone, with the delays tuned for a little more upper mids and highs to get through, for a little more clarity than most of the old delays. The decays are tuned for a smooth decay also.

This analog delay is SUPER easy to get self-oscillation/inifinite repeats going. Even at the longest delay time you don't have to turn the repeat knob up all the way. And it's not touchy like most delays, where it goes crazy and tries to destroy your amp and ears if you turn it up JUST A BIT too much. It's almost like a magic helping hand keeps the delays going but not to the point of pain.

An Alkaline battery will probably last about 30 hours in this pedal as it uses only about 14mA of current. The XL version only uses about 1mA more so it's also good on power. But a good 9V Boss PSA type adaptor is your best bet. Other transformer-based power supplies like pedalpower2, T Rex Fuel Tank, Dunlop Brick, etc are also recommended. DO NOT use an old style carbon battery in this pedal or the tone may be too bright, even when bypassed. These delays are finely calibrated for an alkaline battery or a 9-10V dc regulated power supply.

Product Specs

Condition:
Very Good (Used)
Brand:
Analogman
Model:
AR20DL Analog Delay
Finish:
Red Sparkle
Categories:
Delay
Year:
2000's
Made In:
United States

Listed via the Reverb App

Reverb App Reverb App

About The Seller

Mike's Gear Emporium
Joined Jan 2014
New Paltz, NY, United States

Quick
Shipper
Quick
Responder

Accepted Payment Methods

Shipping Policy

Available for local pickup from New Paltz, NY

Ships from New Paltz, NY to:

Continental U.S.
$0.00

Tax Policies

This seller doesn't charge tax on their sales.

Return Policy

Return Window

This item is sold As-Described and cannot be returned unless it arrives in a condition different from how it was described or photographed.

This listing sold on 1/03/2015

Mike's Gear Emporium

New Paltz, NY, United States
Joined: Jan 2014

Seller Achievements