MDLR CASE Eurorack case 12U/93HP Performer Series MKI
This listing has ended
View similar gear from other sellers on Reverb
Watch this gear and we'll notify you if it becomes available again.
MDLR Eurorack case 12U/93HP Performer Series MKI
*Used in Store demo/videos, 100% working order...*
Technical specifications:
- 93HP 12U (372HP module space)
- Dimensions: L= 52cm W=32cm H=25cm
- Total weight approximately 8 kg (w/ PSU, busboards and rails installed, including lid.)
- Space from top rail to bottom 7,5cm
- Can be carried while patched
- Handmade case, fully nailed and glued construction.
- 12mm birchwood with a special 2 layer protection coating
- Flush-mounted rails allow the modules to be mounted evenly with the sides of the case
- Lid allows to carry the case fully patched
- 8x 93HP rails with M3 threaded inserts
- 2x Konstantlab Boardpower lightweight PSU. (+12V 2A, -12V 1.2A, 5V 1.5A)
- Total power +12V 4A, -12V 2.5A, 5V 3A
- 4 x MDLRCASE Passive busboard, total of 80 headers.
- 2x side-mounted power switch + power inlet
- 2x 1.8m power cord
- 2 x Meanwell power adapter included
- High-quality Penn Elcom components
- Super-comfortable Luxe carrying handle
- Anti-slip rubber feet
- Completely assembled, wired, tested, and ready to play!
PSU
Konstantlab Boardpower ( 1 installed in each case halve)
Dimensions:10 × 4.5 × 2 cm
Weight:127 g
OUTPUT POWER: 45W
OUTPUTS:
+12V / 2A
-12V / 1.2A
+5V / 1.5A
INPUT
18V (16-20V)
OUTPUT CONNECTORS
2x 16 pin IDC for flat cable
4x WAGO spring terminals
INPUT CONNECTORS
WAGO spring terminals
Panel with 5,5 x 2.1 DC input (center positive) and switch included
PROTECTIONS
Input filter
Input overvoltage
Input reverse polarity voltage protection
Output overvoltage
Output short circuit – automatic recovery
Output overcurrent – automatic recovery
All output protections are independent for each rail
EFFICIENCY
92%
OTHER
Input common mode LC filter with high efficiency of canceling noise and interference from input connector
Additional input filter on each regulator
MDLRCASE eurorack busboard (2 installed in each case halve)
2x screw terminals for power supply/second busboard connection
20x standard eurorack power connectors with safety notches to protect from modules reversed connections
3 power rails 12V, -12V, 5V
voltage indicator LED on every power line
decoupling capacitors to remove residual PSU ripple at every power line
switchable 5V linear voltage regulator for power supplies that don’t support 5V output
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
| Listed | 4 years ago |
| Condition | Excellent (Used) Excellent items are almost entirely free from blemishes and other visual defects and have been played or used with the utmost care.Learn more |
| Brand | |
| Model |
|
| Categories | |
| Made In |
|
