Galaxy Audio PA6S Portable PA/Hot Spot Monitor

Mint
$329.99
+$10Shipping
This seller is open to offers

Still Shipping Quickly

This seller is shipping orders within 48 hours, on average.

Buy With Confidence

Reverb Protection has you covered. We provide a safe community for finding the gear you want.

As low as $30/month withLearn more
Shipped From
Alexandria Music Company
Alexandria, VA, United States
173
Sales
300+
Joined Reverb
2015
Preferred Seller
Quick Shipper

About This Listing

This compact stage monitor puts the foldback controls exactly where they're needed — right in front of the performer!
The PA6S is a two-way design with a published frequency response of 50Hz to 20kHz. To keep its weight down, the enclosure is made from a tough, molded plastic, and it has an integrated grab handle at the top.

The PA6S is based around a 6.5-inch neodymium woofer with a 96g magnet, teamed with a 1.5-inch titanium-dome tweeter. Earlier Galaxy monitors used a conventional metal speaker basket, but a few years back they switched to a moulded ABS-plastic basket, which further helps to reduce weight.

This driver's exceptional power handling of just over 150 Watts comes from the use of a long-throw cone and a robust roll surround. Ferro-fluid is used in the voice-coil gap to aid cooling in the woofer and the tweeter. Also featuring a neodymium magnet, the titanium-dome tweeter (which is mounted in front of the woofer) is rated at 60 Watts, and handles the frequencies between 1kHz and 20kHz.

Power for the drivers comes from a 170W amplifier, which on the face of it seems pretty hefty, given the size of the monitor, although the cone driver is not particularly efficient, at 88dB (1W, measured at 1M), so plenty of power is needed to achieve the rated SPL. A preset compressor/limiter is built in to help avoid overloads, and an LED on the front indicates compressor activity.

Up to three inputs can be mixed together, via a pair of XLR/jack 'combi' connectors for mic/line use, and one 3.5mm jack for connecting MP3 players and the like (the level of which must be controlled at source). A recessed panel on the front houses controls for a basic low/mid/high EQ section, plus gain controls for the two XLR/jack inputs.

All the connections are on the rear panel, including the inputs, a preamp output jack (this provides a line-level mix of all the inputs), and Thru output XLRs for each of the two mic channels. These work at mic level, meaning that you could plug your vocal mic directly into the PA6S, and then use the Thru connector to feed a PA mixer. Having this facility on both channels also means that two singers could share one monitor, or that a singer/guitarist could have separate controls over the voice and guitar monitor levels, while still sending the separate signals on to the front-of-house PA system.

The PA6S doesn't actually provide phantom power, but as a test I connected the Thru output to an external mixer with its phantom power engaged. Powering a capacitor mic by plugging it into the PA6S confirmed that phantom power is passed from the connected mixer through to the PA6S's mic input.

At the front of the unit is a blanking plate, which can be removed to allow the PA6S to accommodate an optional wireless receiver for cable-free use (other than the mains cable, of course). There doesn't, however, seem to be any option for feeding additional passive speakers, as there was with some of the earlier Galaxy systems.

Mains comes in on a standard IEC socket, and the operating voltage is either 230V or 115V, depending on the region where the unit was purchased.

With any stage monitor, it is essential to position it where the microphone is least sensitive, so as to reduce the risk of acoustic feedback. The PA6S has a mounting point in the base that can be fitted to a standard mic stand using the included adaptor, but another option is to split a standard boom stand, using the lower half to support the monitor and then fitting the upper half into the slotted mounting point, on top of the case just forward of the handle. This saves on stands and puts the speaker in pretty much the optimum position. Alternatively, side slots allow for yoke mounting in fixed installations.

When the PA6S is used as a vocal monitor, which I'm guessing will be its main application, the sound comes over as surprisingly well balanced for such a small box, with lots of clarity and a decent low-mid warmth. The deep lows are missing, much as I'd expected, but the spill from the main PA more than fills in for that in most cases. The main thing is that you hear a clean vocal sound that makes it much easier to pitch than a muddy monitor mix does. I did, however, find the PA6S a little prone to high-pitched feedback at higher volumes when all the EQ controls were set flat, so I backed off the high EQ slightly, and this seemed to help. In most real-world situations, feedback will set the maximum volume limit well before the PA6S runs out of headroom and, indeed, the only time I got the compressor LED to show signs of life was when turning up the gain so high as to deliberately provoke squeals of feedback.



Product Specs

Listed12 days ago
ConditionMint (Used)
Mint items are in essentially new original condition but have been opened or played.learn more
Brand
Model
Finish
Categories

Seller Reviews

173