Befaco PowSkiff Skiff friendly power supply w/Power Brick

POWSKIFF ASSEMBLED MODULE

Assembled version of the PowSkiff Eurorack power supply from Befaco.

The PowSkiff is a clean, compact, high-amperage power supply designed for demanding systems.

At the +/- 12V rails the PowSkiff can deliver up to 1.5A and 1.3A respectively, as well as a full additional
ampere at both the 5v and 9v rails. It features a frontplate mounted USB-A female socket which is great for
lights, cooling fans and charging your mobile devices. Beware that the USB power is routed from the 5V
rail so if you are using the USB port while using digital modules, anything plugged into it will be subtracting
from the total 1A available (note that charging some phones draws a lot of current).

The 9V output on the front panel is designed with integration of guitar FX pedals in mind and implements a
‘Boss standard’ center-negative DC jack. The 1A available should be sufficient to supply nearly a dozen
standard pedals!

There is also a front panel mounted DC ‘Link’ jack, and two PCB mounted IDC power outputs for easy of use
with multiple buses. To ensure you can fully meet the power needs of your system we offer two low-noise
15V power supplies (3A & 6A), a compact 14-point PCB ‘BusSkiff’ and a ‘flying’ bus cable from our store.

The PowSkiff can function from any center-positive 2.1mm DC connector between 15 & 20V.

Input: 15 - 20 v (laptop like)
Outputs: +12, -12 +5, 9v
Current:
+12: 1.5 A
-12 1.3 A
+5 1A
+9 1A 

POWER SUPPLY 3A SWITCHING BRICK

Cellevia Power - CLD-3612-T2

DC Plug 2,5x5x5L

Output 12V/3A