MaxTrap - BEIGE
Broadband Corner Bass Trap
- High performance corner mounted bass trap
- Suspended diaphragm absorbs bass down to 40Hz
- High density front absorber controls highs & mids
- Ideal for small rooms where modes cause problems
The Primacoustic MaxTrap is a highly effective bass trap that
combines a diaphragmatic resonator with a full-size acoustic panel in a
sealed enclosure to provide 3-way absorption throughout the full
frequency spectrum.
This unique design begins with a 3″ thick front-mounted 24″ x 48″
Broadway panel made from 6lb per cubic foot high-density glass wool
fiber. This effectively absorbs frequencies down to 100Hz. Behind the
panel, a closed air space takes full advantage of quarter-wavelength
principles to further reinforce low frequency absorption in this
critical bass region.
But where the MaxTrap truly shines is in its capacity to absorb deep,
low bass. The MaxTrap’s remarkable low frequency extension is achieved
by way of a suspended diaphragm that stretches the full size of the
device, capturing bass by vibrating where the low frequencies are most
prominent. As room modes combine, they either reinforce certain
frequencies or cancel them out. The MaxTrap’s limp-mass structure
naturally migrates to the most powerful frequencies where it quietly
resonates to remove excess bass and subsequent modal frequencies.
Available in black, beige or grey, MaxTraps ship flat and assemble in
minutes using standard household tools. Optimum placement is in corners
where walls intersect and sound naturally gathers. For rooms where
windows and doors are in the way, the wall-mountedPrimacoustic FullTrap
presents an excellent alternative. When combined with Primacoustic
Broadway panels and diffusers, one can turn virtually any room into a
well balanced acoustic space.
The Primacoustic MaxTrap; quite simply, the best bass trap made today.
The Primacoustic MaxTrap is a combination full range absorber and
diaphragmatic resonator designed to control all frequencies right down
to the deepest bass.
This is achieved by combining a full-size high density glass wool
panel (F) with a closed air space behind (B) created by the wood frame
(A) to absorb sound below 100Hz. Lower frequencies pass through the
front face and then cause the internal diaphragm (D) to resonate. The
greater energy contained in low frequencies causes the limp-mass
diaphragm to naturally migrate to the frequencies where room resonance
is most prominent, thereby reducing the effect of powerful room modes.
Made from easy to clean black melamine coated wood composite frame
(A), the MaxTrap ships flat in kit form to save freight costs and
assembles in about fifteen minutes using standard household tools. Once
together, the device hangs easily in the corner using supplied French
cleats.
The MaxTrap may be ordered in a choice of black, grey or beige fabric covering to suit most color scheme
Frame Material
Black melamine laminated MDF
Dimensions
24” (610mm) x 48” (1219mm) x 19” (See detail dimensions)
Panel Material
Formed, semirigid inorganic glass fibers; Density 6.0 lbs. pcf. (96 kg/m3)
Fabric Facing
Acoustically transparent polyester
Diaphragmatic Membrane
Loaded vinyl, 1.0 lbs. per square foot (4.88 Kg/m2)
Fabric Color Codes
Black=00, Beige=03, Grey=08
Mounting Hardware
Wall mounting cleat, wood screws and drywall anchors included.