Radial MIX2:1 Two Channel Audio Combiner & Mixer

MIX2:1 Part no: R800 1036 00 Combine two balanced mic or line-level signals

The MIX 2:1 makes it easy to sum together any two signals, whether it's two microphones on a single guitar amplifier, or the stereo line outputs of a mixing console. At the inputs of the MIX 2:1, both ¼" TRS and XLR connectors are available, with ground lift switches to eliminate buzz and hum from ground loops and ensure noise-free operation. A trim control is also featured on each input, so if you are connecting two separate mono sources such as the outputs of two mic preamps, they can each be attenuated as needed to match their levels at the output. After both signals are passively summed together, they feed a single XLR output that can be connected to a powered speaker, or the input of a console or recording interface.

• Mix two channels to a single mono output
• Individual level controls can be bypassed when not in use
• Balanced 1/4″ TRS and XLR inputs
• Completely passive, no need for power

Specifications
Audio circuit type: Passive mixer Frequency response: 20Hz to 20kHz Dynamic range: >133dB Total harmonic distortion: >0.005% @ 0dBu Intermodulation Distortion: >0.002% @ 0dBu Phase Deviation: 0° @ 20Hz, 0° @ 1kHz, +2° @10kHz Input Impedance: 8 kΩ Output Impedance: 1 kΩ Common Mode Rejection Ratio: >80dB Noise: -113dBu Maximum Input: >+ 20dBu Features 180° polarity reverse, Ground lift, Level Control Input Connectors: 1/4", XLR Output Connectors: XLR General Construction: 14-gauge steel chassis and outer shell Size (L x W x D): 5" x 3.25" x 1.85" (12.7 x 8.3 x 4.7cm) Weight: 1.48lb (0.67kg) Shipping size (L x W x D): 6.25" x 4.12" x 3" (15.9 x 10.5 x 7.6cm) Shipping weight: 1.77lb (0.8kg) Power: Passive, no power required Conditions: For use in dry locations only between 5°C and 40°C Warranty: