Riversong Tradition 2 Performer 2010’s Gloss Lutz Spruce Top, Satin Walnut Back & Sides

SALE! This a chance to get it while I’m in the mood to move it

This Riversong Guitar was hand made in Canada from wood sourced from their own Forest. They are the brainchild of Mike Miltimore.

Top: Lutz Spruce
Back & Sides: AAA Walnut
Arm & Rib Bevels

The neck is not attached to the top and goes through the guitar, to the bottom. This gives the guitar awesome sustain. The neck angle (action) can be user adjusted easily. Intonation can also be adjusted easily by the user by moving the neck in and out of the body. It’s as easy as turning some Allen screws. Mike shows how to do this on YouTube. No more running to the luthier to adjust for humidity changes.

There are plenty of demo videos showing the sound of these. It’s great unplugged and plugged in. The diffuser disc just below the sound hole equalizes the string volumes, and reduces feedback and wolf notes.

The side monitor port is perfect for player monitoring and works great as a humidifier port too.

It uses Ratio Tuners. Each tuner has a different ratio so that the same turn, results in the same string movement on each string. The headstock is designed with each string being a straight pull to the bridge, resulting in better tuning stability.

Double reaction bridge is not glued to the top but held in place by upward and downward pressure. No more bridges being pulled off the top, or bowing the top

Nut, Saddle, and Pins are made of TUSQ.

Jescar Fretwire

It’s an acoustic with a very fast electric hard maple neck with a walnut fretboard and maple leaf inlays. (16” radius)

The case is a fabric covered hard shell case that isn’t of the quality of the guitar. There are areas where the fabric is not attached and was cut too short. It came new that way and that was the nice one