The Goodrich 10K Volume Pedals look like the rest, but looks can be deceiving. Several features put them in a class by themselves. One important difference is that any value pot from 10K to 500K can be used if it is a high quality pot with a logarithmic or audio taper. Goodrich is now equipping The buffered circuit results in the most minimal frequency loss obtainable, extremely quiet operation, and a total harmonic distortion of less than one tenth of a percent. The Goodrich H10K and L10K also offer up to 3.5 db of gain. In addition to these very important advantages the use of very long output cable is possible without tonal loss. Two low impedance outputs are provided; so you can drive two amps, or use one for your amp and the other for a tuner or direct to mixer application. The 10K Series requires the use of a 9V Battery. The circuitry is designed for long battery life.

Goodrich has developed a circuit using a 10k pot in place of the 500k pot. This will result in a longer pot life and the 10K pot is much less subject to noise. This pedal uses active impedance-matching "no-loss" circuitry. Electronic and other extraneous circuit noises are present throughout your equipment. The circuitry in this pedal removes the "hiss" and "muddiness" from your guitar's sound. What? You don't have a noise problem? No, not until you use this pedal and hear the difference. You will then discover the "mud" in your sound that was there all along. You had grown accustomed to it. Your friends have told you about their Goodrich "no-loss" pedals, but you thought it was hype. It wasn't! You just didn't realize that you need circuit-matching between your guitar and your amp. Just try one; that's all you'll need to do.

Like all Goodrich pedals, two outputs are provided. If you desire, you can send one signal through your effects loop and/or go directly into a recording board. All this added amplification can allow you to drive two amps with no loss in the signal to both. If you need to use a longer output cable, you will not experience any noticeable loss of volume.

A 9-volt battery powers this pedal, and it lasts 1,000 hours. If you want to really increase battery life, simply pull out the line-out cord when you finish playing.

Features:

  • Goodrich H-10K
  • Active model
  • Two outputs
  • Custom Engineered Goodrich Pot
  • Guaranteed for 1 year
  • Can be used for 6-string Guitar, Steel Guitar or Keyboard applications

ConditionBrand New (New)
Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more
Brand
Model
  • H-10k HighTen High Profile Passive Volume Pedal
Categories

Reverb Protection

Simple Returns, Secure Transactions, Human Support

Learn more

Secure Checkout

Vision Guitar

San Jose, CA, United States
Sales:88,327
Joined Reverb:2014

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

Oops, looks like you forgot something. Please check the fields highlighted in red.