1 Piece Korina Black Limba Tele Body Black Limba Tele Neck With Ziricote Fretboard Routes Std/P90

Korina Black Limba Tele Body and Neck

Korina/ Black Limba is considered the Mother Of All Tone Woods!

I have accumulated way too many projects and will never get to them all. If you have something else in mind please send me a message because I just might have the body and neck combo you are looking for. I have several different bodies and necks, a lot of them made from exotic wood in stock collecting dust.

Do you want to build your ultimate Tele? This one has a lot going for it. The body is made from 1 piece Korina with some Black Limba showing through on the back. 1 Piece Korina bodies are rare and expensive. Price one at Warmoth!  In the pictures of the sides it looks like different layers of wood, but it isn't. Those are from the different pass of the router and will disappear when you do the final sanding. Also, there are 2 small worm holes on the back. The neck is made from Black Limba and the freatboard wood is Ziricote. This combo will have tone for days.

If you need other parts like tuners, bridges, neck plates, pickguards and all the electronics, we carry them all to complete your project.

You can also commission us to complete this build for you. If this is something you are interested in please send me a message.

Body Specs

• 1 Piece Korina Black Limba Body
• Full Size Tele Body 1.75" Thick
• Standard Fender Tele Neck Pocket
• Standard Bridge Pickup P90 Neck Pickup Routes 
• Weight is 4 Pounds 12 Ounces
• Tight Body to Neck Fit

Neck Specs

• Black Limba Neck
• Ziricote Fretboard 
• 21 Medium Frets
• White Fret Dots and Black Side Markers
• Single Action Truss Rod Heel Adjust
• 25.5" Scale
• 10" Radius
• .89" Thick 1st Fret, .93" Thick 12th Fret
• Tuner Holes 8.7 (Vintage)
• Nut Width 1.67"
• Heel Width 2 3/16"
• Flat Bottom Nut Slot
• Weight: 15 Ounces (Very Light)

Note:  

The frets on these necks are not leveled before sale. The fretboard is carefully manufactured to have a straight and even radius but fret leveling and crowning may be necessary for a low action setup.

Neck does not have a finish coat, further sanding may be required before a finish is applied. This piece has a light coat of walnut oil applied to seal the wood and accentuate the grain.

The body might require some finish sanding before a finished is applied.

The neck to body fit on this one is tight and will require some light sanding to get them to fit before or after the finish is applies. It is up to you to decide.

Please Note: When you receive this project, please examine both pieces before doing and work on them. If you have any concerns please get in touch with us. We will not except any returns once you modified the body or neck in any form.

Take a look at all the pictures and ask all questions before buying. This body/neck combo will be packaged securely before shipping. 

*** INTERNATIONAL SHOPPERS, PLEASE MESSAGE ME FOR A SHIPPING QUOTE ***