Explorer Project Guitar
This is a Hand Built Black Diamond Explorer Guitar
A Much Older Guitar i had built years ago, i just haven't had the time to complete it with all the other guitars i am building right now so i decided to sell it for a Great project for budding Luthiers.
It has been sealer with Nitro Sealer and a few coats of Nitro Lacquer Only,
some areas show some sanding as per usual because this one was probably slated to be painted on the backside.
it may also have some blems, imperfections or flaws which is normal prior to the finishing process.
You decide the finish you want or just let it as is sealed.
Needs a nut installed
The center Korina section is slightly raised on the face of the body but level on the back of the body.
Here are the specs so far...
Body- solid Mahogany w/Korina Center wood
Neck- Set solid Hand carved Mahogany C-D shaped
Headstock- Solid Mahogany
Fingerboard- Korina w/ white celluloid Block inlays
Fingerboard Radius- 12"
Scale- 24.625" (22-frets)
Two-way trussrod
Still needs:
Finish or painted etc.
Sanded and finished as you see fit
Note-The back of the neck at the 1st fret has a
hand designed wood inlay routed and bonded into the neck for that custom look!
Thanks you
& GOD Bless!
This is a Hand Built Black Diamond Explorer Guitar
A Much Older Guitar i had built years ago, i just haven't had the time to complete it with all the other guitars i am building right now so i decided to sell it for a Great project for budding Luthiers.
It has been sealer with Nitro Sealer and a few coats of Nitro Lacquer Only,
some areas show some sanding as per usual because this one was probably slated to be painted on the backside.
it may also have some blems, imperfections or flaws which is normal prior to the finishing process.
You decide the finish you want or just let it as is sealed.
Needs a nut installed
The center Korina section is slightly raised on the face of the body but level on the back of the body.
Here are the specs so far...
Body- solid Mahogany w/Korina Center wood
Neck- Set solid Hand carved Mahogany C-D shaped
Headstock- Solid Mahogany
Fingerboard- Korina w/ white celluloid Block inlays
Fingerboard Radius- 12"
Scale- 24.625" (22-frets)
Two-way trussrod
Still needs:
Finish or painted etc.
Sanded and finished as you see fit
Note-The back of the neck at the 1st fret has a
hand designed wood inlay routed and bonded into the neck for that custom look!
Thanks you
& GOD Bless!
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
Listed | 4 years ago |
Condition | Good (Used) Good condition items function properly but may exhibit some wear and tear.Learn more |
Brand |
|
Model |
|
Finish |
|
Categories | |
Made In |
|
Body Type |
|