2 JBL VS3218-6 3-way speakers and 1 JBL DSC260 speaker processor

I have for sale 2 JBL VS3218-6 3-way sound reinforcement speakers as well as the companion JBL DSC260 speaker processor. This system is a great fit for installation in a club, theater, performance hall or church. The system components are in good condition with the outer appearance showing signs of normal wear, just need a fresh coat of paint. Included are two NL8 connectors.

VS3218-6

The JBL VS3218-6 provides unprecedented bandwidth and maximum SPL, all in a single system package. The VS3218-6 is a three way design with 60° coverage pattern featuring a powerful 18" LF transducer that provides powerful bass with useable response to 35 Hz. A 10" cone midrange driver loads the waveguide midrange horn, extending pattern control and giving exceptional clarity and projection. A 1.5” HF horn providing smooth even coverage completes this unique design.

The VS3218-6 is fitted with suspension points that accept M10 threads. The enclosures are coated with a hard wearing, weather resistant, textured finish, premium 13 ply wood and an 18 gauge steel grille and are paintable.

The VS3218-6 is designed for tri-amplified use only. Utilizing the DSC260 digital controller for crossover, signal alignment and equalization functions provides optimum system performance.

DSC260

The DSC260 provides two inputs and six outputs. In addition, up to 30 bands of EQ can be assigned to inputs or outputs eliminating the need for additional outboard equipment. Signal delays can be assigned to any input or output independently and can be linked to other channels for stereo or delay tower operation.

To assure optimum acoustic performance, careful consideration was given to the overall circuit design including high quality 20 bit A/D and D/A converters as well as minimal analog circuitry. The DSC260 achieves a very low noise floor, smooth amplitude response, and maximum dynamic range.

Specs:

VS3218-6

Low frequency driver: 8 Ohms 800 W, AES; 3200 W Peak. Recommended Amplifier 1200 W

Mid frequency driver: 8 Ohms 250 W, AES; 1000 W Peak. Recommended Amplifier 600 W

High frequency driver: 16 Ohms 75 W, AES; 300 W Peak. Recommended Amplifier 200 W

Trapezoidal, 22.5° side angles, birch plywood

Mil-Std 810, IPX4 per IEC 529

12 points; accepts M10 threaded hardware

Black DuraFlex coating

Black powder coated zinc treated 18 gauge perforated steel grille

2 x NL8 Neutrik Speakon connectors