Doepfer A-160-2

Price$89.91
+ $54.49 Shipping
$5.45 shipping when combined
1
3 in stock
Watch this listing to get price drop alerts
Listed:over a month ago
Views:307
Watchers:11

14-Day Return Policy

Enjoy peace of mind with your new gear

Shipped From
Modularsquare
Paris, France
(866)
Sales
1000+
Joined Reverb
2018

Reverb Protection

Simple Returns, Secure Transactions, Human Support

Learn more

Secure Checkout

Module A-160-2 is an enhanced version of the standard clock divider A-160. The module is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Clock input will take any digital signal from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV interface. At the outputs, you have access to three sets of seven different sub-divided clock signals, from half the clock frequency down to 1/128. The low/high levels of the output signals are 0V and about +10V.
The A-160-2 also has a reset input. Whenever a reset signal is sensed, all outputs are set to certain levels which depend upon the selected mode.

 
These are the most important features of the module:

  • Three different sets of dividing factors, selected by a three-position switch at the front panel:
    - power of two: 2, 4, 8, 16, 32, 64, 128
    - prime numbers: 2, 3, 5, 7, 11, 13, 17
    - integer: 2, 3, 4, 5, 6, 7, 8

  • Two output modes, selected by a two-position switch at the front panel:
    - Gate mode: outputs act like the outputs of typical binary dividers
    Trigger mode: in this mode the outputs are AND-wired with the clock signal (i.e. the clock pulsewidth affects the pulsewidth of the outputs)

  • Clock edge type selected by a jumper on the pc board:
    - positive: the rising edge of the clock signal triggers the state change of the outputs
    - negative: the falling edge of the clock signal triggers the state change of the outputs

  • Reset behaviour by two jumpers on the pc board:
    - level triggered: the level at the Reset input triggers the Reset
    - edge triggered: the edge of the signal at the Reset input triggers the Reset
    - positive: a high level (> 2.5V) or the rising edge at the Reset input triggers the Reset
    - negative: a low level (< 1 V) or the falling edge at the Reset input triggers the Reset

  • Output polarity selected by a jumper on the pc board:
    - positive: non-inverted outputs
    - negative: all seven outputs are inverted


 
Technical Specs.:

  • Width: 4 HP

  • Depth: 35mm
    Current Draw: 50mA


Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

Oops, looks like you forgot something. Please check the fields highlighted in red.